Chapter 142 Assembly
“Assembly is a big project.” Gong Zhou’s tone was relaxed, but there was no hint of lightness in his words.
Everyone saw him opening the lid of the box and taking out the pot body that was sealed on all sides. He also took out the car that had been left aside for a long time.
“This pot has no mouth now, and before we can officially open it, we have to carefully determine the position of the spout and mark it.”
“Hey. ...For the Xishi pot, the spout can be placed here. Okay, let’s use a fine needle to lightly scratch the surface along the bottom of the spout to mark a range for it...and then we can officially open it.”
"You need to pay attention to the opening, because when we put on the mouth piece, we put on two layers of mouth pieces, and the edge of the cover plate of the pot lid should be stuck on the edge of the mouth." Gong Zhou dragged the pot body, He couldn't help but gesture with his hands.
“So when we open the pot, generally the top layer of the mouth should be opened wider, and the lower layer of mouth should be opened two circles slightly smaller than the mouth. It can accommodate the poke opening and allow free entry and exit.”
“This way we can. The spout of the pot will form a small depression downward, which can hold the lid well, making the lid and the entire purple clay pot look integrated, making the shape of the purple clay pot more complete...but you need to pay more attention when cutting. Some strength and propriety.”
“But, let’s do it. The Xishi pot we made today is a truncated lid. This kind of lid does not pursue the small edge. The openings of the upper and lower layers are the same size and can be freely passed through by the poke. But in order to demonstrate the difference to you Today, I still follow the manufacturing process of our spout. The two-layer method is used to open it. "
"--So, the first thing we need to open here is the mouth cover. Don't cut it too hard when you start, cut off the lower mouth piece together. If you change the style of the pot, it will be over, and the pot body will have to be redone.”
"Like this - come on, Comrade Xiao Xu, the three of you come closer and take a closer look. Although we have cut off the mouth cover, the lower mouth piece is still very complete, and you can't see any cuts. Traces of it? "
Gong Zhou said, calling the girls to come forward and look at the pot in his hand.
Xu Yichi and others were slightly startled when they heard this, and they all stretched their heads in a hurry. The body of the pot held by Gong Zhou in the palm of his hand had indeed been opened, and the mouth firmly underneath it had been opened. On the film, there were really no scratches.
“That’s amazing!” Xu Yichi covered his face and shouted softly.
Actually, before coming to Jiangsu Province, she went online to do some homework related to the production of purple clay pots. However, watching the video of the craftsmen driving the car to remove the lid, it was all the same. Seeing Gong Zhou make a purple clay pot with ease is a different feeling - there are some things that you may not have much experience just watching the video. Only when you really see it with your own eyes can you know how deep the skills are and how awesome the skills are. [Beep——]!
"The oral piece below really didn't hurt at all...Senior Gong Zhou, how on earth did you do this?" After receiving permission, Xu Dachang picked up the piece and Gong Zhou took it off and threw it aside. After observing the broken purple sand mud cover, I couldn't help but marvel at Gong Zhou's craftsmanship.
——She could clearly see just now that the cut on the edge of the waste mud cover was clean and neat, without any trace of mud or being pried open, which showed that Gong Zhou had really let the car go The blade penetrated the entire mouth cover, but did not damage the mouth piece at all.
What kind of knife control technology is this?
If it were her in this step... She would either cut through two layers of flaps in one go, or she wouldn't be able to cut through even one layer of flaps at all.
“Haha, this is nothing special,” Gong Zhou laughed loudly while holding the pot, “To borrow a sentence from Wen Zhonggong – ‘Nothing but familiarity’!”
< br>
"If you practice for a long time, you can still do it."
"That's not necessarily true...this thing looks so difficult." Xu Yichi shook his head and backed down in front of the audience.
Seeing this, Gong Zhou didn’t dwell too much on this issue with her. He just picked up the truck again with a smile: “Okay, let’s not talk about anything else.” “You guys first. Continue to watch me make the pot.”
“After opening the lid, the next step is naturally the opening piece.”
"I have just discussed the key points that you need to pay attention to when opening this mouth piece in detail - the diameter of the mouth piece opening of the non-truncated lid type pot is smaller than that of the mouth piece, which can accommodate the poke and ensure that the mouth piece is poked. The mouth can be moved in and out freely, and the cut-and-cover type is the same as above.”
"Well, there is no need to change the size of the rectangular car. I just adjusted the size according to the stamp. Now that it is in position, then turn -" Gong Zhou controlled the rectangular car and carefully turned the wooden turntable at the bottom of the pot. , "Okay, now our spout is opened. Simply grate it to make the incision It’s relatively smooth and smooth.”
“Then open the water outlet under the spout.”
“Eh? The water outlet under the spout actually needs to be opened.” Mr. An, who couldn't catch up with Xu Yichiduo, twisted his eyebrows in confusion, "I'll go first I thought that the thing was to dig a big hole directly at the spout."
"Oh, we don't want to dig this hole!" Gong Zhou shook his head after hearing this, "We have to dig a hole directly for the tea leaves. Why don’t they all follow the big hole and let the tea flow out?”
“Moreover, the spouts of some pots are wide and small. If you really dig a hole, too many tea leaves will fall in, and it will easily block the mouth of the spout!”
“So it’s not fun to dig that big hole... …This is what we use when we open the water outlet - Xiao Copper pipe, do you think it looks like the Luoyang shovel they used to dig graves?"
Gong Zhou smiled and raised an open copper pipe with a wooden handle, and the girls stepped forward to take a look. Look, for a moment they all burst out laughing.
“Don’t tell me, it’s really similar.” Bai Miaomiao laughed so hard that tears almost fell out, “It’s just that the Luoyang shovel is many times bigger than this small copper pipe!”
"Of course it should be like that." Gong Zhou looked calm, "After all, the functions are the same!"
"Drill the water outlet - when drilling, you should pay attention to the holes. They need to be arranged beautifully and neatly, with even spacing."
"You can't have three on the left and two on the right - then if you poke, you might as well poke a single hole. "It's hot!"
"Look, if we arrange it this way, the water outlet will be very neat and beautiful." He poked more than ten in one go. Gong Zhou raised his head and raised his eyebrows, "Isn't this effect very good?"
"Indeed, we usually use computers to typesetting, but if we don't use formula templates, we may not be able to be so neat." Xu Yichi nodded - anyway, since she didn't know how to use the built-in functions of various software, she really wouldn't be able to create such neat looping graphics.
"Hahaha, that's because you haven't practiced enough." Gong Zhou grinned, "We just used copper pipes to cut out the water outlets, and the edges are not smooth enough."
"We still have to drill it with Duguo and trim it."