Chapter 1291 Too Many Elements - Excessive (4K)
The students who heard this conversation on the sidelines had extremely violent inner fluctuations.
These manufacturers that the Special Equipment R&D Center cooperates with are all Blue Star's top factories. For example, if a high-temperature alloy manufacturer wants to be a high-temperature alloy supplier for its own project, it must go through an extremely demanding and complex verification process. .
First of all, the trial production sample needs to be delivered to the forging factory established by Titan Star and accepted for inspection. After passing the inspection, the forging must be inspected by Titan Star's parts factory and then processed into parts.
This inspection process requires at least nine rounds, that is, the metallurgical plant needs to provide nine batches or more of alloy ingots to the forging plant for making forgings, which must pass various levels of inspection and finally be made into qualified parts.
Only the finished products in each batch of the above links fully meet the process requirements can they be included in the procurement system of the special equipment R&D center.
And due to the high barriers to entry in the industry, Daxia currently implements licensing management for weapons and equipment scientific research and production activities. Without obtaining a license, you are not allowed to engage in corresponding production activities. Those engaged in fungi-related production activities must pass strict examination and obtain bacteriology qualifications.
The special equipment R&D center follows Jiuzhou Technology’s secret qualification channel for bacteria engineering. The communication and cooperation are with bacteria engineering companies. These companies have strong R&D, management and quality control capabilities, and they are not bad at all. Such a small amount of money.
The reason why I accepted the cooperation from Jiuzhou Technology Special Equipment R&D Center is entirely because the cooperation between Jiuzhou Technology Titan Star Community and them has been very successful over the years. Everyone has obtained advanced technology and equipment, so they are willing to work again. A pirate ship in the special equipment research and development center.
After denying this batch of materials, Li Zhaotang, the head of the laboratory, said with emotion: "The core barrier of deformed high-temperature alloys lies in the smelting of raw materials.
The triple smelting process of vacuum induction smelting, electroslag remelting, and vacuum arc remelting is used to prepare large-size ingots and master alloys. The forming is completed through a specific forming process and the microstructure is specifically controlled. Finally, the alloy ingots are prepared into various specifications. Standard parts materials.
The preparation of various high-temperature alloys we need has different process barriers from raw material smelting to different forming processes. The process progress of these factories depends to a large extent on the stringent requirements for materials in our laboratories. .
After all, these reworks will allow the factory's technical department to conduct repeated trials to optimize marginal parameters. Moreover, the construction of heavy-duty processing equipment and the accumulation of manual experience can only grow through repeated trials and tribulations.
To protect these factories, we should be stricter with them.
To care for our projects, we should naturally value every gram of materials used in the projects.
I heard that the factory is already carrying out research work on triple pure smelting of high-temperature alloys. According to theory, compared with the current double vacuum smelting process, the stability of the triple smelting process will definitely be significantly improved, and the carbide will be further improved. Uniformity of distribution and thermoplasticity.
Tell me more requirements from the factory. Not only do I need to pass two decimal places, I also need a breakthrough to one decimal place.
The materials from our research project will be used in more than just nozzles in the future? The components that can be seen everywhere in the vector engine all require materials with similar performance to a greater or lesser extent, so everyone should not ignore these things.
When I was working in the Titan Star Department, Mr. Gu once said something that remains fresh in my memory. He said, 'Every small detail in scientific research is a boulder on our normal road. Handling a detail well means opening up a smooth road. '
At the beginning, the mecha R&D department hastily ended the research and development of the mecha's mechanical structure and materials. Although the final product satisfied both Junfang and ordinary people, the final one was designed and supervised by Mr. Gu himself. The 'Wukong' mecha is able to use the same craftsmanship to show a force value that ordinary mechas cannot compete with. It relies on careful consideration of every link.
So after that, the mecha research and development department seemed to have disappeared. They did not stand up to speak at many meetings. Every time they spoke, they only asked for people and equipment.
I think that if they work so hard, the next version of the mecha may actually be allowed to be used as a regular weapon.
More than half of this year has passed. When our company begins to summarize this year's major R&D projects, if we are embarrassed on the vector engine project, I am afraid that there will be many fewer engineers willing to come to our laboratory next year. ”
Li Zhaotang sighed with emotion, but his hand movements did not stop.
After taking out the tablet and taking pictures of the material in front of him, he directly clicked the unqualified button and gave four points. A rating of five, well, out of ten.
The materials have not been sealed and returned, but the order score has been presented to the internal management system of a certain bacterial manufacturing company.
After seeing this score and the three characters "unqualified", a staff member with a calm breath became confused.
"What he brewed was unqualified. He was such a troublemaker! If there had been such a thorn in my camp back then, I would have made him run dozens of kilometers with a heavy load. Practice!”
After scolding a few times, the staff member with a somewhat angry face picked up the keyboard on the side and resumed very skillfully. : "Our company has been informed and please return the material in accordance with the agreement. After the inspection is completed, our company will restart a furnace for your company..."
Witness the vector nozzle material and cooling research and development experiments with your own eyes Regarding the "scientific research work" of the head of the laboratory, Li Zhaotang, Gu Qing nodded with satisfaction, and then left the laboratory quietly.
He was not afraid of being held by this senior engineer who liked to hold his hand and discuss technology, the industry, and the international environment. He just felt that his work performance was already very good and there was no need for someone outside the industry like him. People come to point fingers.
After all, it was someone Gu who caused the headaches for those bacteria companies and factories, so Gu Qing left with a little lightness.
After leaving the test room in five steps and two steps at a time, Gu Qing walked straight to the [Special Flight Equipment Pilot Function Research Laboratory].
The office area of this laboratory is not on the upper floor of this building, but on the third to sixth floors underground, with a total experimental area of more than 10,000 square meters.
On the way, Xuanwu also collected some information and provided it to Gu Qing for viewing.
Although Xuanwu compiles several relevant documents from major laboratories every day, these documents are all general descriptions, and some details and "unimportant" items have been deleted to ensure that Information density.
In the information collected this time, what Gu Qing saw was the real gap and historical issues.
Currently, there is a gap between the number of bacteria machines in Daxia and the scale of Uncle Sam. However, the total gap is only the total quantity gap, but the technical gap is extremely vague. Many models have even surpassed the American machines. . According to Xuanwu statistics, the total number of Uncle Sam's active bacterial machines is 16,236, accounting for 27% of the global active bacterial machines, while the total number of active bacterial machines in Daxia is 5,254, accounting for only 7% of the global active bacterial machines.
Looking at various subdivisions, fighter jets are the main force among Bactrian aircraft, with a total of 1,781, but the number is less than 60% of Uncle Sam’s in the same period, and other The number of models is far behind.
In addition to quantity, the advanced nature of Bacteria's aircraft has already shown outstanding performance. Although it is currently in a critical period of upgrading, new fighters are being fielded at an accelerated pace, and the number of special aircraft, transport aircraft, bombers and other aircraft is also increasing. increase.
Having just replaced all second-generation aircraft with third-generation aircraft, many third-generation aircraft have already begun to be replaced with fourth-generation aircraft. When these fourth-generation aircraft were still precious treasures, the J-20, a fifth-generation aircraft But they were also displayed openly and openly.
Because Daxia’s bacteria machine has a small inventory, it can be replaced and upgraded more quickly.
Over the years, the cooperative relationship with Daxia Junfang has deepened, and Gu Qing also learned something: the ratio of the purchase cost of the entire bacterial aircraft to the maintenance cost during the life cycle is close to 1:1.
In other words, if Jiuzhou Technology can guide the technological upgrading of bacteria factories and material factories in Daxia, and possess some excellent enough metal patents, the future trillion-dollar repair market for bacteria aero-engines in Daxia will be There will be a lot of small money falling into the pockets of Jiuzhou Technology.
No, on this road, Jiuzhou Technology still has many competitors.
For example, Western Superconducting, which was established 21 years ago, is currently the only company in Daxia that has commercialized the production of low-temperature superconducting wires. It is also the only company in the world that has the entire process of niobium-titanium ingot rods and wires. production enterprise.
Jiuzhou Technology has cooperated with this competitor on many projects, such as the research and development of high-end titanium alloy materials and low-temperature superconducting materials. It is also the company's UAV aircraft, aerospace department products, and mecha R&D department. One of the major suppliers.
We are both competitors in making money and cooperative friends in the field of research.
This complicated relationship did not make Gu Qing feel troublesome, but made him feel much more relaxed.
After all, I have now focused my attention on the big project of developing the moon. In other resource fields, it is a good thing to have stable teammates to provide high-quality materials.
The sound insulation effect of every room in the Special Flight Equipment Pilot Functional Research Laboratory is so good that when Gu Qing entered the observation area of a certain laboratory, he could not hear any sound from the experimenters inside. .
Only the experimental participant on the examination table, who was tightly tied up like a rice dumpling, lost control of his facial expressions.
The twisted expression made Gu Qing feel a little scared when he saw it.
The special feature of the Special Flight Equipment Pilot Function Research Laboratory is that the vector nozzle material and cooling R&D laboratories upstairs, and the vector nozzle change mechanism design and control system R&D laboratories are all Research and development of physical materials.
However, this special flight equipment pilot functional research laboratory conducts various tests, cultivation, development and re-testing of "biological materials" inhumanely.
The Future Warrior Project is a human enhancement project jointly developed by Gu Qing and Jun Fang. The confidentiality level is extremely high. However, the experimenters are treated very humanely during the progress of the experimental project. Every experiment will fully respect the personal dignity of the participants. , make every effort to ensure the physical and mental health of experimental personnel.
Even every drug test is conducted based on each person's physical fitness after animal experiments such as rats, rabbits, and monkeys are completed.
As it progresses slowly and scientifically, Gu Qing, as a project participant, has achieved physical fitness that far exceeds that of ordinary people.
Compared with the Future Warrior Project, the experiments at the Special Flight Equipment Pilot Functional Research Laboratory appear to be very rough and cruel.
Although the laboratory's experiments are conducted on animals such as rats, rabbits, and monkeys before benchmark tests are conducted based on each person's physical fitness, the success criteria for animal experiments are completely different from those of the Future Warrior project team.
In the Future Warrior project team, in the final level, the monkey experiment, any intelligence, cognitive ability, or physical problems in the monkey will affect the hearts of countless scientists, biological experts, and doctors. Only after all abnormalities have been dealt with can the next step be entered.
In the special flight equipment pilot function research project, scientists only need to record the last level - the monkey's special reaction in the monkey experiment. After confirming that it does not endanger life and cognition, they can Enter the next step and start human testing.
Of course, the selection of human beings as the experimental material for this laboratory research project is not as harsh as that of the Future Soldier project. Basically, orangutans that are very close to humans are used.
Even on the sixth floor, Gu Qing saw several identical orangutans placed in life-support cradle.
"Your intuition is right. The original cosmic ray radiation has no benefit to orangutans. However, after several generations of reproduction, some of the genes that are better for the current environment will be retained and even become dominant genes.
Because of the long term After being immersed in the life-sustaining cradle, the twenty-second-generation experimental subject's lungs developed larger air bubbles. At the same time, the teeth deteriorated severely, and the pineal gland grew somewhat larger.
We. Every time these orangutans are awakened, their eyes gradually lose their confusion. , and even some of them have already understood addition and subtraction within ten on their own.
They have been observing us without any teaching from us, although they cannot do so under the constraints of the cradle. walking, but in our surveillance video Here, there are already five orangutans who can walk on their hind limbs and lift their forelimbs off the ground in their sleep."
Listening to the person in charge of the special flight equipment pilot function research project beside him, he was excitedly listing various things. For this example, the expression on Gu Qing's face was never relaxed.
After the other party finished introducing the situation, Gu Qing, the founder of Jiuzhou Technology, turned his head, stared at the experimental project leader, and said with cold eyes: "So you haven't cultivated a cyborg orangutan that can conduct space experiments yet?"
The person in charge of the experimental project was in a trance when he looked at this cold look.
“We are still unable to understand the origin of orangutan intelligence, so we are currently unable to develop technology that can erase the intelligence of orangutans while allowing them to retain their physical mobility for a long time.”
(This chapter End)