Chapter 239 is going well
National property is more important than Mount Tai.
This is not like what those people said later. In this era, there are countless martyrs who have sacrificed their lives to protect national property.
This is an era when national interests are higher than personal lives.
Yang Xiaotao understands Xu Yuanshan's concerns, even a broken machine is a valuable asset.
"Uncle, this machine has been in the warehouse for several years. Do you think it will continue to be there for a few more years?"
"Uncle, we have an old saying, it is better to ask for yourself than to ask for others! Why don't we take the initiative?"
>
Xu Yuanshan was shocked.
It is better to seek for yourself than to seek for others!
My eyes widened, staring at Yang Xiaotao.
"How sure are you!"
Yang Xiaotao took a deep breath. When Xu Yuanshan asked this sentence, it already represented his inner tendency.
Asking now is just to find out.
“I haven’t seen the machine yet, but I have been researching it in the past few days, and I am 50% sure.”
“If I can see the machine and do some research, I will be at least 80% sure!”
Xu Yuanshan stared at Yang Xiaotao closely. He did not expect that Yang Xiaotao would be so confident.
You know, after the machine was damaged, the rolling mill dispatched many engineers from Sijiu City, many of whom were seventh-level engineers who had seen the rolling mill and were scratching their heads.
It’s not that I don’t dare to dismantle it, but I’m not sure about it. They are afraid that if they dismantle it, foreign experts will find the oil man and blackmail them. They cannot bear this responsibility.
"You must understand that if this machine cannot be repaired after being dismantled, you will have to bear the responsibility!"
Xu Yuanshan is still a little undecided. Even if he is carrying this matter, the board will fall. When it comes, Yang Xiaotao will also be affected.
He didn't want to see Yang Xiaotao be hit at such a young age.
“I understand!”
Yang Xiaotao nodded.
The two were silent.
“Okay! I agree to this!”
"A dead horse is a living doctor. You are right. It is better to seek help from others than to seek help from yourself. This machine will be of no use if it is kept for a few more years. It is better to use it!"
Xu Yuanshan crushed the cigarette butt, Xing Xingzi fell to the ground, and then waved to Yang Xiaotao, "Let's go!"
The two left the office and quickly found Wang Guodong.
To explain the truth, Wang Guodong opened his mouth wide and could not react.
"What are you doing stupidly? Find someone you can trust. Keep this secret in advance and don't publicize it."
"I have personally watched the warehouse, and no one is allowed in."
Xu Yuanshan explained, and Wang Guodong nodded quickly.
Yang Xiaotao knew that this was to give him the bottom line. Even if it couldn't be repaired, as long as the matter was suppressed and not exposed, it would be fine.
Yang Xiaotao took a deep breath and secretly made up his mind to succeed.
"Xiao Tao, who should you call to make up your mind?"
Wang Guodong's head turned quickly, letting Yang Shitou make his own decision.
Yang Xiaotao thought for a moment, and then said, "Let's go to Zhou Peng!"
Wang Guodong was not surprised when he heard this. This man had a good relationship with Yang Xiaotao before, and he was also a member of the factory protection team.
Adding a level three fitter will not delay normal production.
“Okay, I’ll call someone!”
Wang Guodong was about to leave, but was stopped by Xu Yuanshan again.
"Obviously, we said we would help Yang Xiaotao process high-precision workpieces."
"I know."
Wang Guodong left, and Xu Yuanshan led Yang Xiaotao deeper into the factory.
Soon, we came to a remote factory building, and there was a person from the security department patrolling outside the door.
Seeing Xu Yuanshan coming, the man quickly stepped forward to ask.
Xu Yuanshan waved his hand, and the man did not dare to ask more questions, and stayed far away.
Creak
The door was pushed open, and the expected dust did not appear. After the two entered, Yang Xiaotao dismissed the fact that it was very clean inside.
Obviously someone specializes in cleaning.
It also shows how seriously these damaged machines were valued.
The two walked into the warehouse. At first glance, there were seven or eight machines placed inside, most of them were steel rolling mills, and there were two other machines.
Xu Yuanshan led Yang Xiaotao to a corner and looked at the machine in front of him.
There are still traces of flames burning on this steel rolling mill. From the outside, there is nothing wrong with it, but it is definitely not good inside.
“Your father and others rescued this together. Unfortunately, it was badly burned and hit again!”
Xu Yuanshan touched the cold steel with some emotion.
Yang Xiaotao also looked at the rolling mill, feeling a sudden sadness in his heart.
“Except for this one, all the others had different mechanical failures. The people sent from above didn’t find the problem, so they threw it here.”
Xu Yuanshan again Pointing to the machines next to him, he then said, "Just look at these two, and don't touch the others."
Yang Xiaotao nodded, knowing that Xu Yuanshan should not be responsible for the other ones, and he didn't want to cause any trouble to him.
After the two had a conversation, Yang Xiaotao began to look at the rolling mill in front of him.
At this time, footsteps were heard outside, and Wang Guodong led Zhou Peng over, but also Section Chief Zhao of the Security Section came with him.
Xu Yuanshan frowned, but he knew clearly that someone from the security department must have reported it.
Now that he has encountered it, he has no intention of hiding it.
“Old Zhao, let’s go out and talk.”
Xu Yuanshan put his arm around Section Chief Zhao's shoulders and went out, leaving Wang Guodong and the other three behind.
"Brother Tao!"
Zhou Peng was a little confused. He was called out after doing a good job in the workshop. Now he saw Yang Xiaotao and felt confident.
Yang Xiaotao nodded, and then did not tell Zhou Peng in detail, but just told him that he had work that needed his assistance.
Wang Guodong also warned Zhou Peng to listen to Yang Xiaotao in everything.
Zhou Peng nodded.
Xu Yuanshan and Section Chief Zhao walked in again. Section Chief Zhao looked at Yang Xiaotao and nodded slightly.
"I'll ask Wang Hao to come over and watch this area, and make sure no one disturbs you." Wang Hao was the Director Wang from last time, and Yang Xiaotao had some impressions.
“Okay, let’s go and leave this place to him.”
Xu Yuanshan pulled Section Chief Zhao away. Their status together would attract attention no matter where they were.
The two left, but Wang Guodong stayed. He wanted to see what Yang Xiaotao did, and also to find out for himself.
Yang Xiaotao began to prepare.
Two rolling mills, Yang Xiaotao did not choose the one that was burned down, but went to the one with mechanical failure.
If you want to get results as quickly as possible, it will obviously take more time if the route is burned.
On the contrary, once you understand the rolling mill thoroughly, put on your glasses and find out where the fault lies, things will be relatively simple.
Yang Xiaotao began to explore the structure of the rolling mill, then picked up the tools next to it and started to disassemble it.
Click
A screw was turned, and Wang Guodong next to him felt a thump in his heart.
Subsequently, more and more screws were removed, and each component was carefully pulled off by Yang Xiaotao and then put aside.
Sometimes, Yang Xiaotao would look at it carefully for a while, which made Wang Guodong's heart never let go.
It wasn't until he got off work and saw half of the rolling mill dismantled that Yang Xiaotao asked Zhou Peng to stop and leave the warehouse together.
However, when leaving the warehouse, Yang Xiaotao marked the door.
Be on guard against others!
After finishing work the next morning, he led Zhou Peng over after dinner.
When I arrived, I met Wang Hao who was patrolling outside.
The two met and said hello, but they didn't say anything, and they understood each other tacitly.
When he came to the door and saw that the mark was still there, Yang Xiaotao went in and continued to dismantle the machine.
In the following days, Yang Xiaotao finished his work in the morning, and came to the warehouse with Zhou Peng to work in the afternoon.
Sometimes Wang Guodong came back to visit, and Xu Yuanshan would pass by once or twice, but he did not bother Yang Xiaotao.
However, when the two of them looked at the nearly dismantled steel rolling mill, their hearts felt as if they were being pinched by fists, and they did not dare to breathe.
In this way, by the end of the month, Yang Xiaotao was already familiar with the structure of this rolling mill.
I also thought about this simply, thinking that with mechanical proficiency and drawings, I could understand these machines.
But in actual operation, it is different from the similar one.
Just like the components in front of me, they are inconspicuous on the rolling mill. Even the drawings are just a few simple lines. When it is disassembled, a lot of effort is wasted. It cannot be done according to the drawings.
It was not until Yang Xiaotao used the faulty scanning glasses that he discovered that there was a linkage between this part of the workpiece and another piece. If he wanted to remove it, both pieces must be removed at the same time.
If there is no one who understands this, I will probably have to dismantle it violently.
Of course, the consequence is that it cannot be restored to the original state during assembly.
Even before the machine was repaired, I still didn’t know what went wrong.
As time goes by, it has come to the end of July.
Over the past few days, Yang Xiaotao became more and more familiar with the internal structure of the rolling mill. He even felt that his level 2 mechanical proficiency was becoming more and more proficient in these days. Just like what is described in martial arts novels, all the abilities in his body were fully realized at this moment. absorbed.
Great skill!
This has also benefited Yang Xiaotao a lot. As long as he understands the structure of this rolling mill, other rolling mills will not be a problem if they are similar.
At this moment, Yang Xiaotao felt refreshed and full of energy.
Compared with Yang Xiaotao's feeling good about himself, it was shocking to witness Yang Xiaotao becoming more and more familiar with Zhou Peng!
Zhou Peng was shocked when Yang Xiaotao took it down for the first time.
Fortunately, Deputy Factory Director Xu and the Director were together. He thought it was the task arranged by these two people.
If he knew that this was Yang Xiaotao's initiative, he would probably be even more shocked.
Of course, Zhou Peng also learned a lot while following Yang Xiaotao. At least he had an understanding of how to disassemble it, which made him even more grateful to Yang Xiaotao.
If Yang Xiaotao hadn't strictly stated that he would not accept a disciple, he would have kowtowed to become his disciple.
Well, I guess there are many such people.
"What are you doing standing still? Bring me the pliers!"
Zhou Peng was woken up by Yang Xiaotao when he was about to leave. Zhou Peng quickly handed over a pair of pliers.
At this time, Yang Xiaotao put the notebook aside, took the pliers and began to twist the screws.
This is where the damage to this machine occurred.
With a click, a broken part was taken off by Yang Xiaotao.
Yang Xiaotao took off his glasses and looked at them carefully.
The component in front of me is disconnected from the middle. Looking at the cracked joint, it is probably caused by an external impact.
And in this area, it is not caused once or twice. It is probably due to accumulated irregular operations over time.
Yang Xiaotao took out the parts and searched inside the rolling mill for a while before finally putting the complete parts together.
"Brother Tao, what is this?"
"What else can there be, just broken parts!"
Yang Xiaotao didn't say much and asked Zhou Peng to put the broken parts farther away.
“This thing is really not simple.”
Looking at the pieced together, Yang Xiaotao thought, it was almost enough to catch up with the seventh-level artifact.
But these are just trivial matters, he can handle them all by himself.
Having found the crux of the problem is half of the success.
Just replace the parts and assemble the rolling mill, and the task is completed.
But will Yang Xiaotao let this learning opportunity pass?
I finally have the opportunity to dismantle a machine for exercise, how could I not seize the opportunity?
So Yang Xiaotao continued the dismantling work.
Bata
Bata
Parts were being removed and handed over to Zhou Peng for orderly placement.
At the same time, Yang Xiaotao was writing and drawing in a notebook, recording the specific locations, and comparing them with the drawings when he went back in the evening.
Ding Dong
A section of the bronze plate was pulled out, revealing the dense circuits inside.
Yang Xiaotao quickly put down the pliers, picked up the notebook and started recording.
The links of these circuits are much clearer than those on the drawings, and easier to remember.
As long as you understand these circuit boards and wires thoroughly, repairing other rolling mills is not a problem.
In this way, time passed and it was another busy day. Yang Xiaotao twisted his neck and left with Zhou Peng.
Behind them, a bunch of pieces were scattered on the ground. When you look closely, they are arranged in a circle from the inside to the outside, waiting to be reassembled.
(End of this chapter)