Chapter 43 Upgrading the factory area, the mecha production is completed
As he spoke, Lin Shen took the phone further away, pretending not to say anything and preparing to hang up.
As expected, Xie Huaan's voice immediately became anxious.
"Wait a minute, what did you just say?"
"What new project are you going to study? Just wait and I will move the laboratory to you today."< br>
"Send me the address later."
After the words fell, there was a beeping sound from the other end of the phone.
When Lin Shen heard this, the corners of his mouth couldn't help but raise.
Sure enough, he knew that Xie Huaan was absolutely serious about research.
He really never missed any opportunity to study with Lin Shen.
Next, let’s set it up ourselves.
Lin Shen took a look at the floor plan of the factory and went directly to the 3D printing factory area.
Then I started studying the drawings.
Compared to the Iron Man suit, the drawings of the large-scale mecha are more than a little complicated.
In two full hours, Lin Shen had just completed the drawings of the four branches.
And every component is extremely huge. If it is really assembled, the height of this mecha will be seven or eight meters.
You must know that one floor is only three to four meters high, which is as high as two floors.
Mechas are real men’s toys, Lin Shen got excited just thinking about it.
After the drawings of the limbs were set, Lin Shen had already started printing them with a 3D printer.
I have to say that it is very convenient to have special machinery to make it.
In addition to completing the drawings, he didn't even need to assemble it at all.
In fact, the technology of this era is not inferior to the tools for production and assembly.
The only difference is the ideas and some rare materials.
But this is nothing to Lin Shen who fully understands the drawings and structures.
For a full afternoon, Lin Shen was basically busy with drawings.
The lights in the entire factory are always shining.
It was only when it got dark outside that Lin Shen stood up and stretched.
He finally finished all the drawings.
"It's just a pity that the production speed is a bit slow. I'm afraid it will take about a month to complete the production of the entire mecha."
Lin Shen took a look and was still there. The 3D printer, which was running continuously, nodded with satisfaction.
Then I was ready to go home and rest.
In the afternoon, Xie Huaan called and said that the relocation of the laboratory might be delayed for a while.
Because the original Iron Man suit was slightly adjusted due to energy issues.
Now that the energy core has been solved, the original version of the Iron Man suit that has been adjusted can be used.
So we still need to make a new set, which is still waiting to be tested.
Originally, Xie Huaan was even planning to let Lin Shen come back in person. After all, with his leadership, the speed of remaking an Iron Man suit would be much faster.
But Lin Shen was still busy, so he naturally refused.
These matters can only be left to Xie Huaan and the others.
Anyway, I have made it once, and the second time I think it is practice makes perfect.
In the following time, Lin Shen came to the factory every morning. While observing 3D printing, he was also studying other technologies.
He even spent some time to modify the equipment in the factory.
Especially the photolithography machine, relying on the photolithography machines in the factory, has long been eliminated by the times. It can be used to make some ordinary technological products, but it is naturally not enough to make mechas.
Let alone mechas, even if they are used to make Iron Man armors, the products produced may have flaws.
Lin Shen didn’t even want to take a look at the 90-nanometer photolithography machine.
So he spent some time and directly developed a 5-nanometer photolithography machine.
It took him a full week to complete the production of this photolithography machine.
In just this week, the mecha shells that do not need to be printed by a photolithography machine have been completed.
The next step is some finer things, such as built-in parts and so on.
For the next half month, Lin Shen supervised the production of mechas while upgrading various machines.
A month passed quietly.
All the machinery available in the entire factory has even been refurbished.
Lin Shen is very busy alone.
The production of the armor has also come to an end.
Wiping the sweat from his head, Lin Shen looked at the moving robotic arms in the assembly cabin with a hint of expectation in his eyes.
The height of this factory building is already considered relatively high, about ten meters.
But this is not enough. If it is just the height of the mecha, it must be enough. But how should the skills be separated?
And there will definitely be something even bigger in the future, so in order to consider these two points.
Lin Shen simply asked someone to come over and remove the roof of the factory building.
Even the original robotic arm has been lengthened by more than a little.
Finally, after the last part was assembled, Lin Shen could no longer control the smile on his lips.
This is a whole month of his hard work!
Finally completed today.
Although he is alone, Postal himself upgrades and refits the mechanical help.
It is not a problem to complete the production of an entire armor alone.
"Xiao Lin, I'm done here. You can get ready later this afternoon and we will come directly."
Lin Shen's phone rang. After picking up the phone, he called What came was Xie Huaan's voice.
In one month, Lin Shen's mecha has been completed, and their Iron Man suit has also been completed.
The second production time was twice as fast as the first time.
Lin Shen glanced at the assembled mecha, and a smile appeared on his lips.
He didn't know what his expression would be like when Xie Huaan and the others arrived and saw such a mecha.
However, Lin Shen still has some headaches when it comes to energy.
He even went to Old Man Zuo himself for the energy of the mecha.
We just got a controllable nuclear fusion source equipped with an energy core.
Otherwise, such a big guy would not be able to support it at all just by using ordinary energy.
Next, Lin Shen found a huge black cloth and directly covered the entire mecha inside.
Just quietly waiting for the arrival of Xie Huaan and the others.
But it was not just Xie Huaan and the others who came this time, but also Old Man Zuo and Professor Wang.
The three of them got together and got out of the car while bickering.
It was obvious that Professor Wang and Old Man Zuo knew each other.
"This factory area is huge enough. Look at this, you have big plans."
As soon as they got off the car, Xie Huaan and the others were amazed when they looked at the endless factory area.
(End of this chapter)