Chapter 23 Review Team
The transfer training in the morning went more smoothly than many people imagined.
A few people who originally wanted to find fault found that Jiang Hui actually knew a lot.
“Everyone is discussing this year that ‘Practice is the only criterion for testing truth’. What you are saying is very true. From tomorrow onwards, follow people from other departments to the supporting factory for review. Don’t lose it. He's a member of our department."
Lin Tiansheng has always disliked Jiang Hui.
Anyway, he is already a stone in the pit in the technical department, smelly and hard, and he is not worried whether the section chief Liao Chengwen will deal with him.
"Forest Engineer, actually I think the audit team can be divided into several groups, and everyone can go to several supporting factories."
"When the time comes, you can have a good comparison with my master and see. Who is the embarrassment?”
Chen Chenxing saw that Lin Tiansheng was causing trouble just after the training, and he rushed out immediately.
This man needs to be dealt with. We have to find a way to teach him a lesson.
"Huh, before the training, the factory had already decided on the audit, and now it has been temporarily changed. Do you think the factory is run by your family?"
Lin Tiansheng said a bit guiltily.
But Chen Chenxing would not coddle him, "If you don't dare to go, just say so. Don't be weird there."
Chen Chenxing and Lin Tiansheng started to pinch each other and were about to leave the conference room. Liao Chengwen said with a gloomy face: "Are you two idle and have nothing to do?"
"If you have nothing to do, go to the workshop and study each process carefully."
Seeing that Liao Chengwen seemed to be angry, Lin Tiansheng also became a coward.
Although he is a bit generous, he also knows that if he prevents Liao Chengwen from stepping down when everyone in the department is present, he will definitely be punished.
"Jiang Hui, today's transfer training was very good. Come to my office later."
After Liao Chengwen finished speaking, he left the conference room directly.
Jiang Hui naturally followed closely and left.
"Although what Lin Tiansheng said just now is hard to hear, if you go to the supporting factory and fail to calm people down, you will indeed be laughed at."
"You are really confident that you can deal with all kinds of problems in the review team. The situation?”
“If there is a problem, I can still find ways to adjust it now.”
I have to say that Liao Chengwen is still very responsible.
At this time, he is still thinking about Jiang Hui.
"No problem. I have also done a lot of research on the supporting factories that I will audit this week in the past few days. I happen to have a lot of things I want to communicate with them about the development system and development content."
Jiang Hui can't wait to teach those supporting factories how to design and improve parts.
A BJ212 has been produced for more than ten years without any improvements. This is not the way to rest on one's laurels.
“I understand that the topic you did for your previous graduation project was the research on the design and production process of 4MT gearbox. You know more about the research and development of parts and components than most college students.”
< br>“But this time the situation is different from studying in university.”
"If you are embarrassed, not only will the people in our technical department be disgraced, but it will also have a very negative impact on your own future development."
Liao Chengwen once again emphasized the importance of this matter.
But Jiang Hui will definitely not change his mind at this time.
In the end, Liao Chengwen didn't say much, and just asked him to report the situation in a timely manner.
For most of the next day, Jiang Hui kept checking the relevant information of the supporting factories to be audited this week, and further refined some of his previous ideas.
Soon, the review team, which was a little different this time, began to officially start work. Jiang Hui and Chen Chenxing participated in this review on behalf of the Technology Department.
Of course, based on their qualifications, they are definitely not suitable to represent the technical department.
So nominally there is also Hou Guoming, a veteran employee who has not been completely relieved of the influence in the past and has not been completely relieved of the impact, to participate in the review.
However, he is basically responsible for organizing various materials in the technical department. He never speaks when there is no need for him to speak.
This time I went to participate in the audit, and my actual job was to record the relevant audit content.
The first stop is Capital Auto Parts Factory.
Other than engines and gearboxes, this factory is the most important supplier of the Capital Automobile Manufacturing Plant.
Whether it is seats, door locks, or interior and exterior trim parts such as wheel hub bearings, brake discs and door panels, many of them are matched with it.
Even the predecessor of Capital Automobile Factory was Capital Automobile No. 1 Accessories Factory. When the leader looked at the "Jinggangshan" brand cars, he happily said, "The accessory factory can also manufacture cars, which is great. Thank you!"
This accessories factory was the Capital Motors First Accessories Factory at that time.
When the BJ212 was produced later, it was changed to the Capital Automobile Factory.
However, some of the people who originally produced parts and components and several other accessory factories were unified to form the current Capital Automotive Accessories Factory.
Receiving Jiang Hui and his party were He Qingquan, chief engineer of the Capital Automotive Accessories Factory, and the heads of various product production workshops.
This is the first time that we have reviewed the development system and quality management system.
No one has much experience.
The Capital Auto Parts Factory was also worried that they would be caught as a typical example, so they paid great attention to it.
After the review teams from the Quality Section and Technology Section of the Technology Department arrived, they held a kick-off meeting and started the review in separate groups.
Jiang Hui read some information about the seat workshop that morning and asked a lot of questions about seat development.
As a factory that basically only has the ability to process incoming drawings, the various answers given by the Capital Accessories Factory are obviously not very good.
However, Jiang Hui's various questions were very professional. You can't simply say that he is finding fault.
Soon, the review personnel at the Capital Accessories Factory began to feel a little exhausted.
In the afternoon, the reviewers for several consecutive product development system reviews were left speechless by Jiang Hui.
The atmosphere began to change immediately.
Tang Riyue, director of the hub bearing production workshop, jumped out and said: "Jiang Gong, I admit that what you said is very reasonable. We have indeed not made any improvements in design plans and processes in recent years. Really resting on your laurels.”
"But how can it be so easy to design a brand new part?"
"If you think it is easy, then design a brand new wheel bearing."
As soon as these words were spoken, the atmosphere of the entire review site immediately changed.
Hou Guoming, who had been silent all this time, couldn't help but look up at Jiang Hui, wanting to know how he responded.
As for Chen Chenxing, he was thinking about whether he should jump out and slap the table to scold the people at the Capital Auto Parts Factory to muddy the waters.
At this moment, Jiang Hui has obviously become the focus of everyone's attention.
But he was not panicked at all.
I asked so many questions and made people angry, wasn't it just for this moment?
(End of this chapter)