Chapter 48 Pulling the skin of a tiger to accomplish big things


Chapter 48: Pulling the skin of a tiger to achieve big things

As for the clay model, the two of them have heard about it and know what it is about.

But they really don’t know some of the specific requirements.

Originally they thought that the 1:5 clay model was the only thing that needed to be prepared, but they did not expect to make a 1:1 model.

In terms of simply experiencing the effect of the model, the 1:1 model is definitely the best.

You can feel for yourself what the final car will look like after it is produced.

Chen Qi even thought about inviting the leaders of the First Machinery Department and related departments to inspect it after the 1:1 clay model was produced.

This is definitely an opportunity to show your face.

"Xiaojiang, how long does it take to make this clay model?"

Chen Qi asked a question that everyone was very concerned about.

After all, there is a lot of pressure from his superiors now, and he also hopes to show some phased results as soon as possible.

This way he will have more confidence.

“With all the materials prepared, a 1:5 clay model can be completed in half a month at most.”

“When the factory feels there are no problems, we can start making 1: 1's clay model."

"This will take a little more time, estimated to take one or two months."

Jiang Hui naturally did not tell the time when the ideal state would be achieved.

First give the leader a time to report, and then try to complete it as early as possible. That will be credit.

If the reporting time is relatively short at the beginning and cannot be done by then, it will be a dereliction of duty.

Even if the final time spent in the two situations is exactly the same, the feeling is completely different.

This can also be regarded as a survival skill in the workplace.

If Jiang Hui was really a freshly graduated college student, he would probably have revealed the maximum amount of time from the beginning in order to show his face in front of the leadership as soon as possible.

At best, it will be completed on time. It will be very difficult to advance ahead of schedule.

“The design office will arrange a few people to help you, and the materials will be in place as soon as possible.”

“We will try to shorten the time for making the clay model and get it as soon as possible. Get some results out.”

As expected, Chen Qi wanted to get things out as soon as possible.

A clay model that a layman can directly see the effect is definitely more meaningful than dozens or hundreds of drawings you draw.

"Now there are some drawings that Hou Guomin and Chen Chenxing are helping to draw. Then we will also need to ask the comrades from the design department to help with the drawings."

"As for the clay model, Professor Zhu I will bring some people over to help, and I will communicate with the two leaders depending on the situation."

Since I am going to give orders later, I will naturally bring Zhu Jiansheng in in time.

Anyway, as I just said, the appearance sketch was completed under the guidance of Zhu Jiansheng.

Now it is normal to make clay models with Zhu Jiansheng's team.

Besides, the people in the design office have never made a clay model before, so if I ask them to help, the effect is not necessarily as great as the help provided by the teachers and students of Capital Institute of Technology.

“It’s okay, just do as you say.”

“There have been a lot of things in the past half month, so let’s not wait for the weekly meeting.”
< br>“From 8:30 to 9 o’clock every morning from now on, we will simply hold a meeting to discuss the daily schedule.”

Chen Qi is now eager to start the upgrade and modification of BJ212. Previously, the First Machinery Department requested that prototypes be produced next year, and mass production would be officially launched in 1980.

In response to this request, Chen Qi had no confidence at all before.

But it’s different now.

He thinks it is possible to draw the drawings in the next three months, produce the prototype early next year, and officially put it into production within next year.

That meaning is different.

Anyway, producing cars in this era is not as troublesome as in later generations. There are also various complicated certification procedures and test projects that need to be confirmed.

As long as the car can be produced and can be driven normally, it will be considered a success.

With the support of Chen Qi and Lu Jianqiang, the influence of Jiang Hui as a liaison officer has naturally increased rapidly.

Like the design of various parts, he basically drew the structure, and then asked Hou Guomin to lead the corresponding personnel from the design department or the supporting factory to implement the specific component drawings.

At the same time, personnel from the production workshops of relevant manufacturers also intervened in advance to confirm whether there were any obvious production problems in these drawings.

Of course, these are all things for later.

At this time, Jiang Hui is further improving some sketches of the interior, so that everyone can have a more intuitive understanding of the upgraded BJ212.

"Xiaojiang, your speed is too fast."

"It has only been one day, and the production of the clay model will officially begin."

When Zhu Jiansheng appeared in the clay model making room with an associate professor, two teaching assistants and five students from Capital Institute of Technology, he felt a little incredible.

Jiang Hui told himself some things about the appearance concept the night before yesterday, but he didn't expect that he would even draw a sketch so quickly.

No foreign automobile company can achieve this speed, right?

"Teacher, these are things I have discussed with you before. It is not complicated to draw them again."

"The First Machinery Department has exerted greater pressure on the factory. Mr. Chen also hopes that we can make the clay model as soon as possible.”

"Today you brought several teachers and juniors here, so that we can start preparing the clay model together and produce some of the drawings as soon as possible."

Although Zhu Jiansheng is not good at making clay models, other Neither can anyone.

So as long as Jiang Hui cooperates, everything will be easy.

With the "tiger skin" of deputy chief engineer and deputy director of the office, Jiang Hui can mobilize more resources.

Not to mention that every morning Chen Qi, Lu Jianqiang, Liang Yi and various section chiefs from the Design Department and Technology Department attend morning meetings to discuss some specific arrangements for the upgrade of the BJ212.

It can be said that Jiang Hui is completely excited now.

“No problem, let’s act as soon as possible.”

“This is Dai Fuquan, an associate professor in our department, whom you have met before. He has a relatively in-depth knowledge of electronic and electrical related parts. Research."

"The two assistant professors are Lai Yongfeng and Ma Guocheng. You should have seen them. They have relatively high attainments in chassis design and engine research."

Zhu Jiansheng quickly. He introduced it to Jiang Hui.

As for those junior brothers, whether they have known each other before or not, you will naturally know them when you come into contact with them later. There is no need to introduce them specifically.

With the addition of personnel from Capital Institute of Technology, Jiang Hui can mobilize more resources.

If you need to arrange any work, tell Zhu Jiansheng directly, and he will directly help coordinate and implement it.

The progress of the entire project sped up quickly.

The third update is completed, please vote for me~

(End of this chapter)

Previous Details Next