Chapter 76 Is this considered establishing a sect?


Chapter 76 Is this considered establishing a sect?

Everyone can feel whether a lecture is good or not within ten minutes of the speaker’s appearance.

Although the training in the First Machinery Department lasted for a week, Jiang Hui was responsible for explaining the entire process.

Everyone can actually feel his level from the beginning.

Not to mention other things, if someone can sort out the process of new model development in such a systematic way, he is fully qualified to be a teacher for everyone present.

"In the engineering design stage, we need to carry out detailed design based on the general layout sketch and shape design to accurately determine the size and position of each component."

"Then determine the detailed structure, characteristic parameters and Quality requirements. "

"Each assembly must be distributed to relevant departments or supporting factories for separate design and development, including layout drawings of engine compartments, chassis, interiors, exteriors, and automotive electrical appliances..."

Jiang Hui talked for an hour and a half before stopping to let everyone take a break.

And in this hour and a half, everyone who participated in the training was completely recognized for his abilities.

After all, they are all professional technicians in the automobile industry, and they know the value of what Jiang Hui said.

Looking at how quickly they all recorded what Jiang Hui said just now, it can already explain a lot of problems.

"Liao Liaison Jiang, how about you take everyone to visit the clay model of the new BJ212 in the next class, and then introduce the car design to everyone based on the clay model?"

Yu Jiang and Jiang Hui were considered acquaintances.

During the break between classes, I naturally had to come up and say a few words to him.

Others either went to the toilet or took a moment to get a drink of water.

Of course, there were also some who saw Yu Jiang chatting with Jiang Hui and immediately joined them.

“The pictures of the clay model in the newspaper look a bit blurry. If you look at it directly on site, the effect will definitely be better.”

Wang Le, director of the FAW Design Department, naturally echoed his leadership. proposal.

Some other students were also very moved after hearing this.

We have all come to the Capital Automobile Manufacturing Plant, and it would be a pity not to visit the 1:1 clay model that was published in the People's Daily and was rated so highly.

Among domestic OEMs, this is currently the only place where you can see ready-made 1:1 clay models.

"No problem. We originally planned to visit the clay model tomorrow afternoon. Since everyone is so interested, we can also move it to this morning."

Anyway, Jiang Hui will be there for the week's training. Note that it doesn’t matter if you adjust the specific order.

The ten-minute break between classes passed quickly. After restarting the training, Jiang Hui briefly explained the next arrangements, and then took everyone to visit the clay model room.

"Liaison Jiang, I heard that your 1:1 clay model only took a month to make?"

As the deputy chief engineer of FAW, Yu Jiang has also been exposed to clay model making. some content.

As the first automobile manufacturer in China, FAW has also communicated with polar bear experts on car design before.

But there are still many differences between the information I learned in the past and what Jiang Hui said today.

To put it simply, what we understood in the past was not as systematic as it is today, nor was it as simple and clear.

Now Jiang Hui directly introduces some things about the new BJ212 based on the actual clay model. It is much easier for everyone to accept the relevant knowledge points.

"It's almost the same. Strictly speaking, it took more than twenty days."

Jiang Hui stated a fact very calmly.

Since the clay model of the new BJ212 is destined to become an important content in the development history of China's automobile industry, it is natural to make this content appear more powerful.

I’m not bragging anyway. “I once heard polar bear experts say that it often takes three to five months to complete a clay model of a car.”

“Why can the Capital Automobile Manufacturing Plant be so fast?”

Yu Jiang continued to ask.

His words cannot be regarded as malicious, but mainly because he is really confused.

“Designing a clay model of a new car from scratch is definitely time-consuming.”

"Because many of the appearance things are fine-tuned during the process of making the clay model. It is not a simple matter of making the clay model directly."

Jiang Hui patiently explained to everyone.

This is the first time for training on the course "Automotive Design". If the results are good, we can consider compiling it into a textbook and publishing it in the future.

Of course, Jiang Hui couldn't bring this up himself, it had to be brought up by the Ministry of Machinery or other colleagues.

Although the current standard of manuscript fees is not very high, being able to publish several professional books can not only earn manuscript fees, but also increase one's influence in the industry.

This is definitely something worth doing well.

If Jiang Hui wants to develop his own automobile empire in the future, he will definitely need to attract various talents in the industry.

Otherwise, if you just fight alone, you will definitely not be able to accomplish anything.

But if you want to attract outstanding talents to join your company, the key point is to look at Jiang Hui's personal charm and influence in the industry.

There are still many areas where we can work hard.

"Jiang Lianlian, this exterior design is still very different from the current style. Why did you think of designing it like this?"

Over at the Second Automobile Works Group, Han Hao also took the initiative to ask questions.

This time he brought four colleagues from the design department with him. He took it very seriously and hoped to learn some real skills.

As long as you encounter something you don’t understand, you must ask directly.

“It is difficult to describe the exterior design style of a car in a few simple words.”

"But the outside world is developing in a more beautiful direction. This general trend is definitely not wrong."

"Of course, the appearance design must also be combined with the current mold processing technology and other technologies."

“If a car is designed very well in all aspects, but the supporting factory cannot produce the relevant parts, it is meaningless.”

Jiang Hui knows for sure. Many people will have questions about why the new BJ212 is designed as it is now.

What is the logic behind this?

It is certainly a bit difficult to give a very standard answer to these questions.

But if you are just exchanging some thoughts and ideas, then there is definitely no problem.

Jiang Hui can talk to you directly for a whole day, taking out some popular design elements in different eras and talking about them in detail.

“It is true. When designing a car, there are many factors to consider.”

“To a large extent, the design has determined the future of this product.”

Han Hao said something with deep feeling.

Soon, others were rushing to ask their own questions.

(End of this chapter)

Previous Details Next