Chapter 764 New Materials
Hillman Group is mainly promoting new energy this time. The raw material is long-wave (tertiary) yttrium, which is a level five high-energy radiation metal. It is already considered a very high-end energy metal. After all, the same type of energy metal belongs to level six and level seven, as well as the level eight energy metal that is currently listed as prohibited circulation. There is almost no trace of it on the market.
There are not many energy metals that are both level 5 and can be used daily. Most of them are very costly and difficult to develop, and have low circulation rates. Therefore, this new level 5 energy metal naturally attracts attention. . They want to know if this energy metal is practical.
Facts have proved that the Hillman Group is still far-sighted. They have been paying attention to this experimental material since more than 20 years ago. However, it was still in the Imperial Materials General Library at that time, had not passed the experimental test, and had been stuck in the research stage. The Hillman family could only wait patiently. After tracking for more than 20 years and spending huge amounts of application fees and resources, they obtained the initial promotion rights for this material.
This is a very versatile energy metal, and its use and utilization rate are very high in the high-tech manufacturing field.
This naturally caused a commotion among the participants, but they did not forget that the seminar was not finished yet, and there might be more important information later, so they could only listen patiently.
Explaining a new energy material is not that simple. The professional fields are very wide, and the professional knowledge required to cite circumstantial evidence is complicated, which makes the listeners overwhelmed. And as a commercial seminar, Hillman Group's focus is more on exploring the possibility of long-wave yttrium applications in various fields, and the impact of its circulation on similar materials.
With Jiang Hui's current knowledge, she can only understand part of it. After all, her qualifications in raw material science are still too shallow. However, at her age and without specializing in raw materials, it is already remarkable that she can understand part of it.
At this time, another master in the field of raw material research has been replaced on the podium. He was responsible for interpreting the meaning of several long-wave (tertiary) yttrium experimental data. This was even more impossible for Jiang Hui, so she did not overestimate her ability and continued to listen.
"Mr. Vitali, I would like to take the liberty to ask that the residual amount of this material after the second and third refining is not low. I wonder if the residual part is intended for sale to the outside world?"
Vitaly glanced at Jiang Hui in surprise. He didn't expect that the child could understand it to this extent, and even asked him about this newly developed raw material from a very professional angle.
The so-called secondary refining and tertiary refining refer to the products obtained at different stages after multiple refinings.
Energy metals in interstellar worlds are usually refined multiple times into products with different purity. Generally speaking, the first experience can extract the core essence block. This thing is the part of the energy metal with the highest energy content. It is usually a restricted trade commodity and can only be used by military and government.
Then it is proposed that the product from the secondary refining after the core is the real material, and the purity can often reach more than 95%. The various raw materials currently circulated and developed in the interstellar world are usually of this type.
As for the products of the third refining, they are "secondary materials" and generally contain a lot of impurities or non-energy parts that are difficult to refine. This type of material is an impure material, but there are also uses for scrap materials, and raw material merchants will also sell it as a serious trading commodity.
As for what Jiang Hui said, the residual materials after the second and third refining are really semi-waste. In fact, the range of this kind of derivatives is quite wide, and the residual status of different materials is also different. It can still be called "material", and it is not that there is no energy left at all, but after three refinings, the basic energy belonging to the raw materials has been basically refined, and its attribute structure has also been damaged to a certain extent, even some energy metals It couldn't support the refining for three times and it collapsed into pieces. Even if some structures are relatively stable and have slightly higher energy metals remaining, after three refinings, the contents inside have become more stubborn. No matter how much it is refined four times, five times or six times, it remains completely unchanged and difficult to use, so it is appropriate to call it residual material.
Of course, this is for laymen, but for some experts, no, it should be said that they are "knowledgeable" guys, there is still a market for this type of material, because they are willing to explore And take the time to process these outputs that have little value in the eyes of outsiders and maximize profits.
This kid is already pretty good at mentioning this. Even if he knows little about the raw material industry, he is at least a beginner. He remembered that this kid was probably not much older than Aier, and that kid's own family might not be able to even mention it.
No wonder Old Aaron mentioned Al’s friend to him last time and he was quite impressed with her. Someone even discovered the source of the problematic goods.
"We don't sell the scraps separately. There are always people to collect them. But if you need it, you can purchase it separately from the group. If the quantity is not large, I will ask them to share some for you." Vitali Hillman said. Slowly.
Jiang Hui just mentioned it. She is not the kind of person who is new to mecha manufacturing, and she also knows that there is actually a huge market for scraps. As a raw material supplier, the Hillman family has no shortage of industrial chains for processing materials.
According to their past product production patterns, products like scrap materials are extremely unlikely to be launched online. Therefore, it was unlikely that she could buy the materials through normal channels, so she wanted to follow the path of Hillman's second brother. Unexpectedly, the other party readily agreed before she said so.
Jiang Hui was a little surprised and did not hide his excitement: "Can you do it? Thank you Mr. Vitali. I only need a small amount, just want to study it." The last time I sent it, that piece The secondary refining material was a bit small, and she needed to verify it further.
The seminar is very long, and it will be really boring if you don’t understand much. Jiang Hui and Clarence were still teenagers after all, so their attention was still a little distracted after two weeks of persistence. Clarence began to look through Star Consulting, while Jiang Hui continued to outline the product list.
Seeing that the two people had withdrawn their attention from the seminar and started to focus on their own affairs, Vitaly struck up a conversation with Jiang Hui: "I heard from Al that you are teaching yourself how to make mechas?" He picked up a quilt. The directory leaflet was so "squeezed" that it almost fell off the table.
"Yes." The girl took it with some embarrassment and put together the messy list that had unknowingly spread over half of the table.
There is nothing to hide. She is indeed here to purchase mecha parts.
Seeing that the other party was still looking at the messy catalog with some curiosity, Jiang Hui put together the product catalog and handed it to Vitaly and said: "I plan to build an A-class machine myself. Mecha.”