Chapter 455: Large-scale die forging manufacturing research team (10,000 per day, please vote!!))
There are only three colleges and universities under the Ministry of Machinery Industry, and there is actually nothing to discuss.
In the end, everyone unanimously decided to bring Luzhou University of Technology under the jurisdiction of the Science and Technology Commission.
In addition to the need to set up a supporting school in Luzhou, another important point is that the vehicle engineering major of this school has certain strength.
But not particularly powerful.
Studying vehicle engineering in China these days, I really don’t know what I can do after I graduate.
The best position that a joint venture can provide is a workshop engineer, and domestic companies...
It’s okay not to mention it.
When the joint R&D center between Nanjing Automobile and Fiat is established, the situation may improve slightly, but at least for now there is really no future.
Tanks and armored vehicles are a way out, but what a concept in 1997.
The 96A and 99 have not yet been produced. The second-generation 88A/B and the earlier 59/69 tanks have been discontinued. The number of whiteboard 96 tanks is scarce. The entire armored industry production capacity of China relies on the 86 and 92 infantry fighting vehicles. maintained.
The People's Liberation Army cannot equip a few of its own, and if it is exported, it cannot compete with the large number of T72s and BMP/BTRs that were almost sold at scrap prices after the collapse of the Soviet Union...
In short, it is not effective at all.
Those who are a little capable will definitely go abroad.
In this way, retaining a group of mid-to-upper-level mainstays in the country is a more realistic choice.
There is already Kyoto Institute of Science and Technology in the north, and a seedling can be left in the south.
"Then let's settle it for now. Then I can apply to it and it should be fine."
Ding Gaoheng's final decision also means that this topic has come to an end.
Of course, in principle, when allocating colleges and universities affiliated with the Ministry of Machinery Industry, you still need to communicate with them and the Ministry of Education.
But Luzhou University of Technology is not even 211 at this time (it was only selected into the second batch in 2005), so not many people will pay attention to it, so the problem is not big.
"Director, have you considered trying to win over the current authority of the Ministry of Machinery Industry to formulate industrial policies?"
After a brief silence, the director of the Policy and Regulations Department brought up a slightly sensitive topic.
Although industrial policies in general are formulated by the State Planning Commission, the Ministry of Machinery Industry can still provide guidance on specific implementation directions. If it can be obtained, it will obviously be of great benefit to the Department of Policy and Regulations and himself. There are benefits.
Of course, there is also the Commission of Science, Technology and Industry for National Defense.
However, the impact involved in this kind of thing is much greater than that of the school just now, so he can only say that he is "fighting for it."
On this issue, everyone obviously needs to be more cautious. About half a minute passed and no one spoke again.
“I think it’s better not to be too greedy for the big picture.”
In the end, Ding Gaoheng had to express his position:
“Industrial policy formulation is inherently sensitive. , is also the main target of attacks by some people who say that the degree of marketization is insufficient. At least until the WTO accession is completely finalized, it will be a hot potato for anyone who takes it.”
Although I didn’t say it very clearly. Got it, but obviously the "some people" he's talking about are not Americans.
Otherwise, just say it and be done with it.
Now that the matter has come to this, the director of the Policy and Regulations Department also knows that this matter is definitely out of the question.
However, Ding Gaoheng then added:
“Of course, there is no need to be too pessimistic. Although our Equipment Industry Department does not have this authority on the surface, it is just like the one we just appointed. As is often said, you can still do a lot of things by relying on projects and using your skills. "
There are explicit and implicit authority. The former is better, but the latter is better. The latter is not necessarily bad.
The twists and turns are complicated, but everyone who can sit here is an experienced person, so there is no need for Ding Gaoheng to say more.
And he also said just now, "before the matter of joining the WTO is completely finalized."
Who can say for sure what will happen after that.
At this point, the affairs of the Equipment Industry Department have been basically settled.
As for the specific organizational structure and staff composition, it is not something that can be directly determined at the level of the Science and Technology Commission.
"Finally, there is one more thing." Ding Gaoheng put down the pen in his hand and his expression became much more relaxed:
"Xiao Chang, that Jiangcheng heavy machine tool you visited last time Factory, the Ordnance Corporation has basically taken over."
Chang Haonan, who originally thought it had nothing to do with him, suddenly became energetic:
"So fast? Project establishment..."
If the heavy-duty die forging press project is approved, it will definitely be the largest project in China's equipment manufacturing industry in the entire 1990s. It is something that will be recorded in history in the future, so he is naturally very concerned about it.
The choice of equipment in Jiangcheng was also based on the industrial base and transportation convenience here.
The nearly 70,000-ton heavy-duty forging press must contain many large-sized components, both in its own construction process and in the products produced in the future.
In the previous life, Huaxia built an 80,000-ton die forging press more than ten years ago, and the land transportation conditions are no longer the same. It doesn’t matter if we choose Jingcheng, Sichuan Province, but at this time, Jingcheng Erzhong itself has not yet As China developed, many things were transported by water, and even inland water transport was more convenient.
If additional roads need to be built for the die forging press, it will inevitably affect the progress.
Ding Gaoheng naturally knew what he was thinking, and raised his hand to signal not to worry:
"It's just accepted at the moment. According to your previous request, in order to ensure the surprise, I directly sent people to carry out a surprise attack without giving them any The factory director and some important people were also controlled by the opportunity to destroy equipment and evidence. However, Jiang Zhong's matter was quite involved, and the production was damaged, so it would definitely not be possible to restart production immediately. "< br>
“For the die forging press project, you can first ask the System Engineering Department to allocate a sum of money and bring together the core team you want to do some preliminary research. It is best to wait until the Equipment Industry Department is established early next year to formally establish the project. , so that the whole process is done by our own people, and it is easier to control.”
Structure adjustment at the ministry level is of course not just a matter of adjustment. It must be approved by the National People’s Congress, and it will be early next year at the earliest. .
The Second Department of Systems Engineering is responsible for the construction of nuclear power and weapons industries, and is considered the most relevant department under the existing structure.
Chang Haonan is not in a hurry to formally establish the project. As long as he has money and someone can work for him, it will be fine. Anyway, the design work on the turbofan 10 has just begun, and it happens to be a busy time.
"That's fine."
Chang Haonan adjusted his sitting posture slightly:
"It's better to conduct preliminary research in the name of 'large die forging manufacturing process development' and include it by the way. Go to the Seiko Project so that I can step in and take control.”
Although Chang Haonan is at least twenty years younger than everyone here, when he said that he wanted to step in and take control of the overall situation. By that time, no one even felt it was against the rules.
Ding Gaoheng nodded directly:
"Okay, after the meeting, we will report this matter to the System Engineering Department II, and I will solve the money problem."
Only in the first half of this year, the Aviation Industry Corporation The profits and taxes paid by the company were more than five times that of last year. Although the money was not directly handed over to the Science and Technology Committee, with such achievements, Ding Gaoheng would definitely be more confident when he wanted to allocate funds.
"Understood, I will do it as soon as possible."
Lan Xinzhi, who was recording on the side, nodded obediently.
"Then if you have nothing else to add, we will adjourn the meeting!"
As a leader, the most satisfying thing about Ding Gaoheng and Chang Haonan is that meetings are not delayed.
The group of people filed out of the conference room one after another.
"Xiao Chang, I heard from comrades at the Ministry of Machinery Industry that you have made some big noise in machinery manufacturing recently?"
Ding Gaoheng has been waiting for Chang Hao at the door. Come out south.
"As for the bearings I told you before, I have helped the three major bearing groups and two special steel companies solve some technical problems. If nothing else happens, the new bearings may soon be installed and tested on the turbofan 9. . ”
Chang Haonan replied:
“With such a large business, it is definitely impossible for this company to rely solely on aerospace bearings, so it must apply its technology to other fields... ..."
The two of them walked down the stairs side by side, talking to each other.
And this scene made Director Zhou of the System Engineering Department 3’s eyes go straight when he saw it from behind——
The two had met once before.
Only a year ago, she was still thinking of letting Chang Haonan get some experience, and then transfer him to work under her once there was a chance.
As a result, he and Ding Gaoheng are now talking and laughing directly?
And it seemed that he just came out of the small conference room upstairs?
This shows that even a department-level leader like her could not participate in an internal department meeting, but Chang Haonan, an outsider, went in and held it...
Make some sense?
(End of this chapter)