Chapter 569 The new look of Jiangcheng Heavy Machine Tool Factory
Looking at the memo in his hand, Le Maire was sweating all over.
There is a kind of person who secretly holds back his ultimate moves after obtaining martial arts secrets. He thought that as long as he waited for great achievements, he would be able to defeat all the invincible opponents in the world. However, as soon as he came out of the mountain, he found that his martial arts were just generic and his skills were not as good as others. Feel.
But after thinking about it, my mentality is a bit complicated.
After all, this shows that Erwuzi is not the only one.
Although the EU has signed an aviation cooperation agreement with China before, in this year, it is still a relatively shocking decision to cooperate with China in building aircraft.
Even if Flamel has made a decision, after all, everything has not yet been settled, and it is inevitable to feel guilty.
In this case, knowing that another founding member of the European Union has made the same choice will definitely relax your mind a lot.
This is especially true when you think of the great achievements of the Italians in the two world wars (referring to taking sides).
Just like when you were in college and skipped class to participate in other activities. After you went there in fear, you found that the top student in the class was also there...
"So, they...I mean the Italians, where have they gone now?"
With the efficiency of data transmission in the paper media era, the amount of information a person can access every day is very limited.
For example, Le Maire has been coordinating the power of Rafale fighter jets between the French Navy and Air Force and Dassault recently, that is, the performance calibration and development of the M88-2 engine. His attention is basically focused on In China, it is normal to be unable to keep up with news from foreign counterparts for a while.
“This... I don’t know much about it. I only know that Finmeccanica Group sent a high-level delegation there before. What is known so far is that Agusta is planning to develop a The specific technical details of a 6-7 ton helicopter aimed at the high-end market should be commercial secrets and will not be disclosed too much for the time being."
Pierre recalled this while cutting the steak on the plate. The information I have obtained over time:
"There are also several well-known machine tool companies in the industry that have bypassed the Wassenaar Agreement and signed several large orders with China."
"However, many countries are doing this, such as Spain's Boster and Danobat, when he exported equipment to China, he also rented planes from our national airline.”
“As for Fiat, I haven’t heard of any cooperation with China in the aviation business. They developed the car business last year."
At this point, Pierre seemed to suddenly remember something and stopped what he was doing:
"By the way, I heard that. There are some rumors that the F300 car of this year’s F1 Ferrari team that won the championship in the first three races was designed by their Jinling R&D Center established last year.”
Flamel's hand holding the fork also paused in mid-air.
I even forgot to continue chewing.
“Is there such a thing?”
People’s ideas are actually very difficult to change.
Just like now, although Le Maire has made the decision to engage in technical cooperation with the Chinese, this is still more of a case-by-case judgment.
In other words, when it comes to this specific matter, I recognize your strength, but in terms of daily life, I still lack a specific understanding of China's technical level, and I subconsciously think that China is still what it used to be.
This is true even for Le Maire, let alone ordinary people who are not very aware of specific technologies.
For most people, only brands that are visible and tangible can be considered real things.
This process of concept change often takes a long time or a series of landmark events with great influence to complete.
“There is such a statement, and Ferrari has not denied it, so nine times out of ten it is true.”
After speaking, Pierre picked up the knife and fork again and began to cut the meat.
“Forget it, let’s not talk about this.”
Le Maire waved his hand and brought the topic back on track:
“As for the automobile and machine tool equipment, let’s talk about it. It doesn’t matter much. During this period, I will focus on asking about the details of the cooperation between Agusta and China, which can be used as a reference.”
“Since their model is 6-7 tons, then. It should not be difficult to explain that it does not constitute direct competition with NH90.”
"After you go back, remember to make a list of the problems currently facing the NH90 project in order of importance. Then we will see what can be solved during the cooperation process."
"As for the Germans, If you do a little bit more public relations, if you really don’t appreciate it, kick them out, and you will have one less partner to share the money with..."
"..."
So, NH90 The overall direction of the project has quietly changed in this humble restaurant cubicle.
……
This kind of model involves multinational cooperation and is even for military use. If you want to introduce new, non-ally collaborators, even if you have made up your mind, there is still a lot of necessary desk work to be done.
Therefore, when Chang Haonan received the cooperation intention from distant France from Lan Xinzhi, it was almost half a month later. He is following the construction progress of the heavy-duty die forging press at Jiangcheng Heavy Machine Tool Factory.
It can be considered a revisit to the old place.
Compared with the last time I came here with a sneaky attitude, this time it was definitely a serious "inspection" attitude.
Jiang Zhong's old leadership team, including a considerable number of senior grassroots employees, were all removed from the organization in a vigorous investigation at the end of last year.
In order to achieve a seamless connection at the management level, Ordnance Industry Corporation directly transferred half of the leaders of its two second-level state-owned enterprises and took over this enterprise that has been listed as a key national defense unit.
Of course, after this round of big moves, ordinary workers in the factory will inevitably feel panicked.
However, this is the part that is easier to solve -
After the company was transferred to the Ordnance Industry Corporation, the first official document issued by the group was to suspend the layoffs of employees that had already started. and seniority buyout process, and requires all employees to return to work within three days for production assessment, and re-schedule based on the assessment results.
After a round of combined punches, when Chang Haonan arrived here, the normal production of the entire factory had gradually returned to normal.
"Mr. Chang, this is the production workshop of our factory after reorganization. Most of the equipment that was previously intentionally damaged and recorded as scrap has resumed production."
Jiang Zhong's The new factory director is called Liao Xinhua. He was born in 1950. He had been working at the Tiema Group in the neighboring city of Chongqing and has a good understanding of the situation in central China.
At this time, he and Yan Yongnian were following Chang Haonan, introducing the situation in the factory:
“However, according to the results of the police interrogation and the analysis of files in the factory, there are still The equipment worth about 28 million has been resold. It may be difficult to recover it. ”
“It’s pretty good to be able to stop the loss to this level.”
Chang Haonan waved his hand:
“In the next step, our factory’s focus should still be on organizational construction and strict production. , as well as the construction and development of the new factory area.”
“As for the recovery of equipment, Director Liao can do his best.”
In this year, Jiang Zhong’s situation is absolutely the same. It's not an individual case. Many things are not clearly investigated, but involve too many things to be investigated clearly.
After all, Chang Haonan is a technician, not a savior. All he can do is reduce losses within his ability.
Moreover, what he cares most about is not individual equipment, but the ability of Jiangzhong as a whole to build and operate the die forging press reliably.
From this perspective, it can be considered a complete victory now.
After hearing Chang Haonan's statement, Liao Xinhua finally breathed a sigh of relief.
The superior said that a matter should be "doed as best as possible", which implicitly means that it does not need to be done.
He had never been in contact with Chang Haonan himself before, but he felt that he was too young to be ridiculous, and he was worried that the other party was young and energetic, so he had to put pressure on this matter.
If that were the case, it would be difficult for him, a small factory director, to be caught in the middle of a fight between gods on both sides.
But now it seems that although this man is young, his behavior is not naive and he is considered a quite reliable leader.
"In addition, Director Liao does not need to worry too much about the subsequent business development issues."
Chang Haonan patted an iron bump in front of him at the product exit of the foundry workshop, and then said ：
"After production is completely restored to stability, I will have someone conduct a product quality appraisal. If it passes the test, Jiang Zhong can be used as the first-tier supplier of Torch-C.B. Ferrari Group."
Now the joint venture has just At the beginning, in order to ship the goods in the shortest time, the production process was a simple cooperation model in which Italy was responsible for producing the machine tools themselves, and China was responsible for the servo equipment and related software.
However, according to the joint venture agreement, relatively independent supply chain systems will be built in the two countries in the future to adapt to the different market demands in Europe and Asia and reduce production costs.
This process cannot be completed by the small arsenal in Yanjiao alone. It still requires the participation of some suppliers.
No matter which angle you consider, Jiang Zhong is a more suitable choice.
Faced with such good news, Liao Xinhua could hardly hold back the excitement on his face and quickly expressed his stance:
"Please rest assured, Mr. Chang, when I was at Tiema Group, what I was best at was improving quality control. , guaranteed to pass the quality appraisal!”
“It’s good to have this confidence.”
As he spoke, Chang Haonan led a group of people out of the casting workshop.
Several minibuses are already waiting outside.
"Let's go and have a look at the new factory area where the die forging press is planned to be installed."
(End of this chapter)