Chapter 982: So it turns out that Mr. Chang is so happy every day?
In addition to Liu Hongbo and Ed Steiner, other people in the computer room naturally took advantage of this time to communicate quietly.
In French, of course.
"I remember that the wing design was entrusted to the Chinese people at the end of October last year, and it has only been about four months in total..."
A relatively young technician looked at the computer The progress bar moving slowly forward on the screen said to several colleagues around him:
"At that time, the starting point for the optimization of our critical speed was around Mach number 0.8. In such a short period of time... could it really be optimized to the 0.95 level required by the design?"
A few people were standing in a relatively remote place, In addition, it was obvious that the Chinese man did not understand French, so he was not worried about his words being overheard.
"If we only talk about critical speed, I'm not too surprised..."
The next person who spoke was another middle-aged female engineer sitting on a chair:
"In fact, there are many mature technical means that can increase the critical speed to a level close to Mach 1.0, but that is only the most superficial problem in wing design..."
In fact, since the concept of supercritical wings was first proposed in the late 1960s, the lift coefficient of straight wings at medium and high speeds has not been a problem.
This technology can greatly delay the point where the drag divergence occurs on the upper and lower surfaces of the wing, and increase the relative thickness of the wing by 30% to 50% at the same drag divergence Mach number, allowing aircraft designers to increase the total weight of the wing. Design a wing with a larger aspect ratio without changing the condition.
That is, thinner.
As early as the early 1970s, Airbus had already adopted a supercritical airfoil when designing the A300.
By the beginning of the 21st century, in the field of pure aerodynamic lift design, it was indeed no longer a new technology.
Therefore, everyone nodded.
“But...”
The female engineer changed the subject:
“My main concern is that these Chinese people only have experience in numerical calculations, but lack wind tunnels. Or test flight data is accumulated, so that on the surface everything looks normal, but after entering the testing phase, troubles will come one after another..."
Obviously, not everyone initially agreed with the design of the wing. The task is left to China to complete.
"If you are referring to the wing flutter problem, then I don't think it will be..."
A bald old man who had just been staring at the computer screen also turned around at this time:
< br> "Probably... uh... it should be about 6 years ago. At that time, the Chinese people designed a regional passenger aircraft with Finmeccanica Group. Of course, it was a joint design, but there was basically no Italian participation in the hardware part. "
"In my impression, the airfoil design of that aircraft is quite good, and it is very competitive among aircraft of the same level."
"You have always worked at the headquarters. You may not have much of an impression, but I have flown it once when I was on a business trip to Egypt. For a propeller aircraft, the noise and vibration levels were first-rate..."
It is not difficult to tell from what he said that he has a high opinion of the MA60.
“I do know that model, it seems to be called MA60?”
The female engineer just replied:
“I heard that it has indeed affected the market of ATR72 and Dash8. It’s quite a shock, but even at its maximum speed, a turboprop airliner cannot exceed Mach 0.5. The flutter problem in that speed range is completely different from the transonic speed range..."
"This..."
A well-reasoned refutation left the other party speechless:
"It's true..."
"..."
While a group of people were chatting separately Soon, the data in the first batch of hard drives had been transferred. While replacing the second batch, the technicians also opened the transferred project documents at Ed Steiner's request.
For a time, everyone, whether they were doubtful or determined, focused their attention on the computer screen located in the center of the computer room.
After a slightly long loading time, the PDF document was loaded.
Ed Steiner quickly skipped the meaningless content such as project background and prepared to scroll directly to the key parts——
Liu Hongbo may not understand French, but he can understand it Understand.
Although he had been chatting with the former just now, Ed Steiner did not ignore the whispers of the people in the corner.
As the project leader who made the final decision to hand over the wing design to Huaxia Design, he was quite confident.
Now I feel a little guilty.
If, as the female engineer said, there was a big problem with the wing during the test, it would be an absolutely devastating blow to the project progress.
And it was pretty much the same for him.
Fortunately at this time, Liu Hongbo next to him looked at Ed Steiner, whose anxiety was almost written on his face, and extended a helping hand in time:
"You can turn directly to page 377 .”
"What?"
Ed Steiner subconsciously stopped moving his hands.
“Page 377 and onwards are the design description and design conclusion, and the previous part is the design principle and calculation process, which needs to be read in conjunction with the engineering documents... and it cannot be understood in a day or two. ." Liu Hongbo explained.
“Oh...”
Ed Steiner felt that this sentence sounded a bit wrong, but he was in extreme anxiety at this time and had no time to think about it.
I just quickly followed the other party’s suggestion and jumped to page 377.
Sure enough, the most critical part is directly what comes into view.
A graph showing the calculation results of Mach number and equivalent airspeed.
“Oh~”
When the content on the monitor was enlarged, a short but neat exclamation suddenly sounded throughout the computer room.
At this time, Liu Hongbo also spoke appropriately:
“I know that some friends are worried that our lack of design experience will lead to problems with the final design plan.”
This first sentence immediately stunned everyone.
Because Liu Hongbo used French...
"Wait..."
Ed Steiner was so shocked that his eyes almost popped out:
"Can you speak French?"
As for how they just got together The faces of the few engineers turned red and white.
There is quite a sense of embarrassment in saying bad things about others behind their backs, only to be discovered in person.
"I learned a little bit when I cooperated with Eurocopter before."
Liu Hongbo smiled and replied:
"Of course, I am not very skilled in speaking, so my subsequent introduction will still be Will mainly focus on English..."
Really not very proficient.
It can even be said to be blunt.
But enough is enough.
Even those who just watched the excitement or questioned their attitude have now corrected their attitude——
Obviously, since the other party can point out the problem directly, then It means at least you won't be unprepared.
Looking at the French people in the room who were still in shock, Liu Hongbo felt relieved in his heart.
At this time, there was only one thought in his mind;
"Holy shit...does Mr. Chang always feel so happy when he talks about design plans on stage?"
Of course, just thinking about it, I still have to pretend to be serious on the surface. :
“In short, please rest assured Dr. Ed Steiner and all colleagues present here. Although our research in the field of jet airliners has just begun, we can already calculate and restore the vibration of the aircraft in the wind tunnel test. The 'transonic dip' phenomenon of the vibration boundary curve..."
As soon as these words came out, everyone in the audience was shocked.
As the Mach number increases, the flutter speed of most aircraft will gradually decrease in the subsonic region, reaching a minimum near Mach number 1, and then the flutter speed will gradually or suddenly increase.
This is also the main reason why the maneuverability of many aircraft is worst in the transonic range, but gradually recovers when entering the supersonic range above Mach 1.4.
In fact, as early as the early 1960s, NASA had discovered this rule through a large number of wind tunnel tests, and also provided a standard calculation example using the AGARD445.6 airfoil.
However, no one has ever been able to reproduce this problem during the design calculation process before.
"But...this..."
The female engineer who had just expressed her doubts was almost incoherent:
"The nonlinear aerodynamic performance of different airfoils in the transonic stage is completely different. If it can be calculated...could it be that you have solved the N-S equation theoretically?"
"Uh...then... Not really.”
Liu Hongbo was also speechless at this too-dramatic speculation:
“If the smoothness and solvability of the N-S equation had been proven, I think you would have done it long ago. I saw the relevant news... just like when the Poincaré conjecture was proved two years ago."
"In fact, we discovered a method that combines efficiency and accuracy in the transonic range. The new turbulence model, you can call it 'Chang's turbulence'..."
"The specific engineering calculation process involves our business secrets, so I am sorry to disclose it, but the turbulence model itself can be found and used in the TORCH Multiphysics software version 2.0 released next month..."
(End of this chapter)