Chapter 1131: Ask for help!
No one spoke in the huge workshop.
Casore didn't even need to look back, he could feel a dozen scorching eyes from behind staring at him.
The first thing is to wait for him to make a decision.
Second coming...
It is inevitable that there will be the intention to watch the fun.
After all, it was you who vowed to make all the big parts first and then concentrate on pre-connecting them, and there would be absolutely no problems.
And now, this three-centimeter-wide gap is right in front of you, how do you explain it?
He lost his temper.jpg
So, in just a few breaths, Kasore felt like he was breaking out in a cold sweat.
In fact, before he returned to France, the two sides also discussed whether to send a team of Chinese engineers to accompany him.
However, from China's perspective, the entire process flow was designed by Liang Shaoxiu himself, and he even received some help from Chang Haonan during the process.
It is impossible for these two people to move away from each other.
If you send other idle engineers, it will not solve any practical problems.
From Casore's point of view, he doesn't want to behave too much in front of his partners, so he hopes to return to China alone to complete the production tasks.
Therefore, this matter finally came to an end.
But now, Casore has never felt so regretful.
The result of insisting on saving face is to lose even more face in the end...
Fortunately, after all, he has experienced many battles and has seen a lot.
Although he was extremely remorseful in his heart, he still acted like "everything is under control" on the surface. While he came closer and pretended to check the situation, his brain was running rapidly, thinking about whether there was any remedy.
After a few minutes, Kasore finally calmed down.
Although I am very reluctant to admit it, the fact is that in the past few years of cooperation with the Chinese, whether it was Rafale fighter jets or Falcon 8Z business jets, the other party had never made any particularly serious mistakes.
Therefore, the first thing he thought of was whether there was something wrong with the factory.
"Char, show me the production log."
Casore turned around and ordered as calmly as possible.
Of course, a serious factory cannot mess around like a small workshop.
Every step of operation must be recorded accordingly.
“Here.”
Bain took out the materials he had prepared.
In fact, he had already checked the contents of the log.
After confirming that it was correct, I went to find Kasore.
Sure enough, the latter read it twice from beginning to end, and found no problems.
And if there is no error at the operational level...
"Supervisor, can you determine where the problem lies?"
Someone in the crowd behind asked appropriately.
It's hard to tell whether the heckling was intentional.
Cold sweat flowed down.
But just when Kasore could hardly get off the stage, another voice suddenly came:
"Supervisor, the width of this gap from top to bottom is almost exactly the same. In fact, ...It doesn’t seem to be caused by the deformation of parts or the flow of gaps.”
This sentence instantly awakened him.
For parts with different specifications and locations, the allowance calculated before pre-connection is also different.
If there is a problem at the design level, it should be an uneven situation.
Unless a certain constant is omitted during the calculation process——
And this is obviously too outrageous.
Casore turned back with gratitude.
But he discovered that the engineer who had just rescued him was the engineer who first asked him questions a few days ago...
For a moment, Kasore felt mixed emotions in his heart, and he didn't even know what to say.
It wasn’t until about half a minute later that he spoke again:
“I’m going to report the situation to the design team. After all, it’s the first time to apply a new process, so it’s normal to have some problems... It shouldn’t be difficult to solve.”
……
In the evening French time, the corresponding capital time is exactly noon.
Therefore, the explanation of Casore's situation was almost immediately placed on Liang Shaoxiu's desk.
Looking at the photo in front of him, the latter only felt that his eyes were a little dark.
The reason why he gave this job to the French was to use this opportunity to conduct a technical verification and dig out the hidden dangers in the entire technology.
But the hidden dangers that Liang Shaoxiu has thought about are that the tolerance is relatively large during assembly, or the strength is not up to the expected standard during testing.
At most, it can be solved by manual rework.
I never thought that the problem could be so big.
When Casore took the photo, he was afraid that there would be no reference object, so he specially inserted a vernier caliper. Although I can’t see it clearly due to pixel issues, it must be about 2.8 centimeters anyway.
This is definitely not a problem that can be solved by hitting a hammer or changing the position of a few pre-connection points.
There must be something wrong with every preset unit, and finally it was concentrated and reflected on this crack.
What’s even more troublesome is that because he himself was not at the scene, he could not conduct a more detailed analysis.
As for the ideas raised by Casore...
He first said that he had checked the logs and it was unlikely to be a problem in the production and processing process.
I also think that the gaps are too smooth and neat, and it does not seem to be a problem in the design process...
It was as if it had been said.
Looking at Liang Shaoxiu, who had a gloomy expression on his face, Ma Lin, the deputy chief designer sitting opposite him, tentatively suggested:
“Mr. Liang, based on my front-line management experience in the workshop, You can't trust the production logs entirely... If you want to fully understand the problem, I'm afraid you need to ask them to disassemble the assembled parts, and then check whether each parameter is consistent with the design requirements one by one..."
This generation of aircraft designers in China are very experienced in solving production problems.
After all, all the way up to Project No. 10, we suffered big losses in this regard.
It was the accident that almost destroyed an AL31FN that made the aviation industry system determined to vigorously rectify non-compliant operations in the production process.
It’s only been more than five years now.
As for Liang Shaoxiu, who was born in a small factory, he knew all this clearly.
But if you really follow what Marin said, the inspection alone will take almost half a month.
This is a major blow to the entire "Gaoming" project.
It would be fine if it were left to normal.
Anyway, always keep the backup plan, so it’s not a waste of money.
But now is the key point to compete with the Kingdom of Wei and prepare to compete with the steamed buns.
If he pulls his crotch, even if his superiors don't say anything, Liang Shaoxiu himself will not be able to get through it.
After thinking for a long time, he leaned forward and picked up the receiver of the red phone from the corner of the table, and then dialed a three-digit extension number.
"Hey, Xiao Liu, help me arrange something..."
At this point, Liang Shaoxiu's voice stopped suddenly.
On the other end of the phone, a confused and anxious voice came:
"Mr. Liang?"
On the second call, Liang Shaoxiu replied. Come to think of it:
"No need for now, you can get busy."
After saying that, he pressed the off-hook button at the speed of light, and then dialed a longer number again.
About ten seconds later, the call was connected.
“Hello?”
The person on the other side of the phone is naturally Chang Haonan from Haofa Group.
Coincidentally, he had just returned to the office from a round of testing, and before he even had time to drink, he heard the intercom phone ringing.
"Hello, Mr. Chang, it's me, Liang Shaoxiu."
Although they were separated by the phone line, Chang Haonan still heard that the other party's tone was not right:
" Is something wrong?”
And Liang Shaoxiu’s answer met his suspicion:
"Something went wrong in the pre-connection process of the back wall panel unit..."
"The production movement at Dassault was really fast, but during the assembly process, it was discovered that the units did not match up. No., there is a gap slightly less than 3 cm..."
"The safest way now is to dismantle them all and recheck the production status of each component, but I want to ask you... is there any There is no better way, I have sent the situation report to you..."
Obviously, this is a trick.
However, even Chang Haonan cannot analyze the causes and solutions of problems by just listening with his ears.
So as he spoke, he quickly opened his internal mailbox.
"Don't worry. I'll take a look at the specific situation. Tomorrow at the latest..."
Chang Haonan originally wanted to say that he needed a day and would give an answer tomorrow.
But at this moment, he happened to see the picture attached to the report.
“Okay…”
Liang Shaoxiu was already ready to hang up the phone.
“Wait a minute, don’t hang up yet!”
Chang Haonan quickly shouted to the other party to stop the call.
“Tell Dassault to change the positioning method from N-2-1 to N-1-2, and then try changing the bandage clamping direction from horizontal to vertical.”
(End of this chapter)