Chapter 75 Deep Command (please order)
With the full cooperation of the town government and village committees, the number of local contracted farmers of Hailufeng Company has increased dramatically.
In less than five days, the 400 acres of fish ponds allocated to the assistance program were completed by the six administrative villages of Magong Town.
A total of 316 poor households have signed quantitative breeding contracts. The town government has also allocated 1.5 million special funds to help some poor households who do not have fish ponds dig fish ponds.
Some poor households with fish ponds have already begun preparations for breeding, ordering Egyptian pond lice fry, and contacting relatives and friends to ask for their leftovers.
This trend also affected ordinary villagers, and soon the remaining quota of more than 200 acres of fish ponds was emptied by surrounding villagers.
Taking into account the stable supply of raw materials, Jiang Miao, her brother-in-law and others discussed and approved an increase in the quota of 500 acres of fish ponds.
Only then did all the local farmers interested in signing contracts be absorbed.
And the other side.
The second-hand feed production line purchased from Boss Du in Yangjiang was also transported back to Magong Town in more than a dozen large trucks.
Boss Du is quite kind. He introduced the supplier who had previously ordered the production line equipment to the personnel of Hailufeng Company to receive the equipment. At the same time, he also handed over the post-maintenance and overhaul contract signed by him and the other party to Hailufeng. company.
Considering the problem of equipment installation, Jiang Miao did not find another equipment company to install it. Instead, he asked the equipment supplier to send people to install it. At the same time, he asked the other party to conduct a comprehensive inspection and maintenance of these equipment as soon as possible.
However, Jiang Miao does not need to follow up on these matters himself. He just signs the matter, and the people who really follow up must be the employees below.
Similarly, at the environmental protection office affiliated to the company, Lu Mingyuan and others have completed an inspection of the gold and silver processing plant in Meidu Town and brought back a preliminary environmental protection improvement plan.
Inside the office.
Jiang Miao poured Lu Mingyuan a glass of Phoenix Dancong.
"Boss, this is my environmental protection renovation plan." Lu Mingyuan handed over the plan first, then picked up the tea cup and took a sip.
After taking the document, Jiang Miao looked through it for a while.
The environmental protection renovation plan for the gold and silver processing plant mainly focuses on noise isolation, air powder sedimentation, gold and silver powder recovery, and sewage recycling. The overall cost of equipment and construction renovation is about 600,000.
He took out his ballpoint pen and signed it, approving the plan.
"Mingyuan, it's just the right time for you to come back. I'll leave my new mission to you."
Lu Mingyuan put down his tea cup: "Boss, please give me your instructions."
"Part of the production equipment of the feed factory has been returned, and the site of the feed factory is also being repaired. You should plan the environmental protection project of the feed factory as soon as possible before the factory is put into operation."
Naturally, Lu Mingyuan would not put off such a matter of responsibility: "No problem, I will bring people to settle in the feed factory tomorrow."
Immediately afterwards, Jiang Miao explained some of the subsequent work, asking Lu Mingyuan to continue to follow up on the progress of the environmental protection project of the gold and silver processing plant. At the same time, he began to arrange inspections of feed factories, canneries, laboratories, and farms to plan and design these factories and sites. Environmental protection supporting projects.
…
After handling the arrangements for the environmental protection project, Jiang Miao handed over other matters to deputy general manager Jiang Haibo, while he concentrated on experimental work.
Regarding matters in the experimental area, although there have been many changes within Anjiade Company, the company's stock price has been fluctuating on the Hong Kong stock market for several days, and there have been several civil and military fights during this period.
However, these matters have little to do with Hailufeng Company, because the other party has completed the rectification of the problems on time, including replacing the second-hand instruments that were stolen.
Now that the other party had rectified the relevant problems, Jiang Miao quickly signed the project acceptance letter after confirming that there were no problems.
In the past few days, he has been taking Shuya, Zhang Chengdong and others to familiarize themselves with the experimental instruments, especially the most important genetically modified instruments.
Because the application of genetically modified technology is an important direction for the company in the future, he, Shuya and others must become familiar with it as soon as possible.
Fortunately, there is an appraisal panel. Although the appraisal panel cannot deduce unknown technologies, the various conditions of existing items will be displayed in detail on the appraisal panel.
This allows him to know these equipments well and it is easy to operate these instruments. After all, the identification panel has displayed all the information of the instruments. If he still cannot learn this, then there is really no cure.
In front of a computer supporting the genetically modified equipment, Jiang Miao looked a little solemnly.
Because the problem with this computer is very serious.
It’s not that Anjiade Company gave them fake goods, or that the equipment malfunctioned.
The supporting computer in front of me is imported inside and out, including the software, and the equipment is in very good condition.
What really made him restless were some hidden problems deep within the device.
Through the identification panel, Jiang Miao discovered many hidden problems on the supporting computer. Although there were no major problems with the software on the computer, there were 387 hidden deep instructions hidden in the computer's CPU.
These hidden deep instructions cannot be hidden at all in the information displayed on the identification panel.
The effect of these 387 deep instructions is to regularly collect experimental data, and then burn the data on a part of the "scrap circuit" of the storage chip.
As long as the computer uses WLAN, Bluetooth transmission, USB interface, and Internet access, the corresponding deep instructions will be activated and start sending the data stored in the storage chip through various methods.
It's simply pervasive.
These instructions cannot be modified through software, because these are the physical settings that exist when leaving the factory. Only by destroying the circuit of that part of the chip can it be possible to erase these deep instructions. Some people may think that Jiang Miao is simply worrying that other equipment suppliers will not steal Hailufeng's experimental information.
But this premise of not stealing information is limited to the currently unknown Hailufeng Company. Once the Hailufeng Company develops in the future and threatens the interests of Western forces, they will not let go of this secret-stealing method.
Jiang Miao looked at the information recorded on the identification panel and thought about how to solve these hidden dangers.
If there were completely domestically produced precision instruments, then he wouldn't have to worry so much. It's a pity that the domestic precision instrument industry is not very strong.
In particular, things like chips are basically imported. Even precision instruments that are claimed to be domestically produced, the chips and core components used in them are most likely manufactured by Western companies.
After thinking about it for more than ten minutes, Jiang Miao suddenly looked hard.
I came to a computer supporting an electron microscope. After skillfully dismantling the case, I removed the motherboard containing the CPU chip.
Then he unfolded the identification panel and looked at the 3D model of the chip. As expected, in order to facilitate hiding, the circuits for deep command storage were concentrated in an "abandoned circuit" in the corner of the chip.
Unfortunately, this chip has been encapsulated. If you want to destroy that part of the circuit, you must remove the epoxy resin layer of the package. This may affect other functions of the chip. After all, he is not a professional chip repairer.
But that doesn't mean there's nothing he can do.
A large number of tools and materials were taken from the tool room inside the laboratory.
First, he used aluminum foil and glue to wrap all the parts that did not need to be damaged. Then Jiang Miao took the motherboard to the seed physical mutagenesis room.
Turning on one of the high-power ultraviolet irradiators, he skillfully operated the software on the accompanying computer to unlock some of the functions that had been disabled by the system.
Place the motherboard on the irradiation area of the UV irradiator, fix it in the designated position, and then press the start button.
A positioned purple light shines on the chip, and the center point of the shine is the only location that is not wrapped in aluminum foil.
After the calibration was completed, Jiang Miao pressed the start button without hesitation.
An invisible ultraviolet ray penetrates the epoxy resin.
In fact, the epoxy resin used in chip packaging has a certain anti-ultraviolet effect, but unfortunately it encountered a rival like Jiang Miao.
The resistance of anything to ultraviolet rays is often not comprehensive. In other words, there are some specific ultraviolet frequency bands that can avoid this resistance.
Jiang Miao selected a frequency band that is most likely to penetrate this type of epoxy resin, so the encapsulated epoxy resin cannot block ultraviolet radiation in this specific frequency band.
Soon these ultraviolet rays penetrated the epoxy resin and penetrated into the core chip circuit layer.
High-power ultraviolet light continuously shines on the chip's nanocircuit, beating every minute and every second.
Through the identification panel, Jiang Miao could see that the circuit was aging and collapsing little by little.
It only took about eight minutes for Jiang Miao to press the pause button because the "scrap circuit" on the CPU chip was really scrapped.
Reinstall the motherboard.
After starting the computer, there is no abnormality in the surface function of the system.
Obviously those deep instructions are equivalent to America's shadow cabinet. Although they are real, if they disappear, they will not affect the use of the normal functions of the system.
Since it does not affect the use of normal functions, Jiang Miao will naturally not let go of the deep command circuits on other supporting computers.
It took more than five hours to remove the CPU chip motherboards of 43 supporting computers and dispose of them harmlessly.
It is estimated that the equipment manufacturers did not expect that someone would use this method to "scrap" their deep command circuits hidden in the deepest parts.
Without these deep command circuits, those supporting programs hidden in software and hardware will naturally have no way to be activated.
After all, the deep command circuit is equivalent to the brain. Now that it is brain-dead, those supporting programs are equivalent to a vegetative state.
However, there are still some hidden dangers, that is, forces familiar with these hidden programs can reactivate these hidden backdoors by implanting Trojans.
Fortunately, Jiang Miao had a solution, which was to destroy these hidden programs through secondary programming.
If Jiang Miao is asked to program a useful program, it may be very difficult. After all, he is not a professional programmer.
But if he is allowed to destroy it and paralyze part of the program, it would be too simple.
You only need to open the underlying code of these programs, and then insert some garbled code into the part of the program that needs to be paralyzed, so that these programs can become a pile of dead code.
Therefore, he disabled all the corresponding programs for the Bluetooth connection, infrared transmission, wireless network, wired network, and USB interface of these computers.
These supporting computers achieve physical disconnection from the Internet.
Even if someone takes a data cable and plugs it into the interface, no data can be read out unless the computer's storage chip and motherboard are stolen.
(End of chapter)