In fact, with the formation of the master company, AMD has also been affected; it’s just that AMD is positioned at a low level, so the impact on them is not as big as Intel’s, so the pressure is much less, so now Just compete with Intel to see who can't hold on first. As long as it withstands the pressure, it can grab a lot of profits for AMD.
It seems that not only Chinese people are aggressive, but other ethnic groups are the same, and there is nothing rational in the face of interests!
In other words, the development of expert companies will inevitably infringe on the interests of others. One chip technology makes the two giants nervous, and software technology has caused worldwide competition. It's just that Western countries have purchased the full set of octal source code from Gaoshou Company. Giants like Microsoft quickly completed their transformation and became stronger in such a turbulent market. The only difference is that China's domestic software market has begun to be occupied by China General Software. Writing programs entirely in Chinese makes English programs completely useless.
In fact, even Microsoft's new system is inevitably mixed with some Chinese. There is no way. Although the source code of Gaoshou Company is code programming, Gaoshou Company has also done processing, and some codes are displayed on the screen. It's just a Chinese character that cannot be changed until Microsoft understands it thoroughly.
Generally speaking, the development of the master company to this day should be regarded as a peak. But then, the special materials launched by Gaoshou Company made more companies pay attention.
There are tens of thousands of special materials companies around the world. It stands to reason that the sudden rise of such a company will have little impact! If the value is not enough, looking at the technology that is far beyond this era, tragedy will inevitably happen.
Among them, the direct impact, and the most severe impact, should be the British company GKN Aerospace. As the world's largest provider of solutions for aerospace composite materials, metal structural parts, and difficult core components, GKN Aerospace's decline is the reason for its decline. Especially obvious!
Anason Dynasty was staring blankly at the several structural parts in front of him. The silver-grey metal material was inconspicuous. It was really unremarkable. It could even be said to be ugly. It didn’t have any of the beautiful luster that metal should have. . However, just these few small mechanical components were ordered by GKN from Huaxia Gaoshou Company at a cost of one million pounds.
It's a bit sad to say that as the world's largest aerospace parts supplier, one day it needs to order other people's parts! Of course, GKN got it not to use it, but to copy it! Take a look at how your competitors are doing.
There are a small number of plastic structural parts and more metal structural parts. After repeated verification, plastic structural parts can completely replace the current low-end aviation aluminum materials. High-end ones have not yet been able to replace them due to reasons such as friction and high temperature. However, it is said that China has begun producing plastic aircraft. I don’t know how they have solved the problem of plastics not being able to withstand high temperatures. But it is undeniable that plastic, which has a density of only nearly a quarter of aluminum, has better thermal insulation properties than metal, and can reduce the weight of an aircraft by at least two tons; if it is a large aircraft, it can even reduce the weight of the aircraft. The weight is more than ten tons or more.
Metal structural parts are amazing. They have super hardness and even good elasticity. They can withstand greater force per unit area. In theory, they can reduce the size of current aerospace engines by three times or more! This brings up another problem: the cost price of aerospace is calculated in "grams". Sometimes, in order to reduce the weight, even a screw must be designed with a reasonable thread density, thickness, etc., because through such a design, the screw can be lighter in weight while maintaining high strength. You know, when space technology first developed, the cost per gram was as high as $100,000!
Under this circumstance, it is conceivable that although the price of Gaoshou Company looks very expensive, in the aerospace field, it can only be described as cheap. Therefore, even if China has such stringent requirements, it is still very popular and brings unimaginable benefits to the master company.
However, this situation is unacceptable to GKN. At the beginning of this year, the company’s turnover has already dropped by 30% year-on-year! This is also due to the large number of price cuts by my company.
But low-end products will never be as profitable as high-end products! GKN's top market segment has almost entirely been taken over by master companies! In fact, many of the drawings received by Gaoshou Company are internally disclosed technologies in some Western countries, but even so, they are still very good technologies.
Perhaps the only good thing is that the high-temperature performance of this material is not good enough. The hardness will change when it exceeds 800 degrees, and it cannot maintain good working condition when it exceeds 1,000 degrees.
"My own company develops high-temperature materials?" Annason began to think. “It seems like it’s really the only way to catch up with the master companies!”
But then Anason sighed, high temperature materials are easier said than done! Nowadays, many countries and institutions are researching high-temperature materials. However, natural ores, tungsten, the most high-temperature resistant material, with a melting temperature of more than 3410 degrees, may be the most ideal material!
However, the fragile nature of tungsten has cut off its use in high-end materials. Perhaps, cutting materials is the biggest use of tungsten.
"Dong dong..." There was a knock on the door.
"Come in!" Anason put the information away, making himself look confident.
"President, Citibank is here to collect the loan." The assistant's voice was low. Over this period of time, GKN's decline has been beyond imagination, and has exceeded the decline of almost all aerospace companies. Technically, the master company brought a near-destroying blow to the company. This is thanks to China's blockade, otherwise GKN would have filed for bankruptcy long ago.
"I know, let's inform everyone to come over for a meeting. The company should make changes."
On March 20, the world-renowned GKN announced that the company would package and sell its composite materials company division, and the company would begin its transition to the production of aero engines. According to reports and survey data published by GKN, in the future, in about 30 years, the world will enter a high-speed space development path. Therefore, as the heart of space technology: engine technology, will be greatly developed. . To this end, GKN will plan ahead and research engines that are suitable for the future space environment. GKN's changes not only affected the accelerated development of aerospace technology around the world, but also made some countries understand: GKN has been forced into a desperate situation by a master company!
A company that has just emerged, and three materials that have been released for less than half a year have forced a company with a history of more than 150 years into a situation where it has to undergo transformation and development!